Want to Buy Rivco Chrome Solo Rack 3010, Swing Arm Cover TR3015 & Drive Shaft Cover TR3016

[Ishrub]

A few RIVCO part numbers & descriptions

RIVCO TR3015 Rocket III Swing Arm Cover


TR3015
Covers all outside surfaces and the end of the swing arm. Made from laser cut formed steel, triple chrome plated and adds a lot of shine to your Rocket III for very little money. Attaches quickly and securely using the brake hose guide clip bolt.






Rocket III Drive Shaft Cover

TR3016
Covers the visible portion of the drive shaft housing and will add a lot of shine to your bike for very little money. It is triple chrome plated, attaches quickly and securely with supplied springs that are not visible when installed. Also included is a small chrome plate to cover the surrounding top of the swingarm.



Rocket III Solo Rack

TR3010
Give your Rocket III the "custom cruiser solo" look! The rack bolts on when the passenger seat is removed, it is laser cut from steel, formed to hug the contour of the rear fener, polished and triple chrome plated. With the removal of three bolts under the seat you can easily return to the passenger seat.


TR III Passenger/Corbin Bags Relocators

TR3005-6
With the Corbin bags and stock pegs there is little room for the passenger foot. This set of brackets replace the original ones supplied with your Corbin bags to allow use with Rivco Passenger Boards giving maximum comfort to your passenger.


Rocket III Rear Billet Caliper Cover

TR3031
This rear chrome plated billet caliper cover with the Triumph logo engraved on it hides most of the unsightly black and adds an eye catching accent to the brake caliper. It attaches easily and securely with 3M VHB double faced tape.

Rocket III Front Billet Caliper Covers

TR3030
These front billet, chrome plated caliper covers with the Triumph logo engraved into them, hide most of the unsightly black and add an eye-catching accent to the brake calipers. They attach easily and securely with 3M VHB double faced tape. Sold in Pairs.

 

[tribal]

Thanks for the info. Did you happen to find any of the drive shaft or swing arm covers?

I located a new manufacturer for the Solo racks but didn't order one yet. It looks identical to Rivco. L85 for Black & L145 Polished.
I purchased my belly pans from him last year.

Triumph Custom Parts

-https://www.pjglassfibre.com/product/rocket-3-rack.html-

 

[Ishrub]

Thanks for the info. Did you happen to find any of the drive shaft or swing arm covers?

I located a new manufacturer for the Solo racks but didn't order one yet. It looks identical to Rivco. L85 for Black & L145 Polished.
I purchased my belly pans from him last year.

Triumph Custom Parts

-https://www.pjglassfibre.com/product/rocket-3-rack.html-

Yes they very good source of great custom R3 stuff.

I got a red stripe bellypan from them before too.
57 R3 specific products is impressive for ANY aftermarket company besides this one that has only really emerged on the world stage oin the last couple of years rapidly expanding their product range of all modern Triumph models stuff.
Triumph Custom Parts

As you say their stainless polished and satin black racks are very similar to our Chromed mild steel RIVCO ones.

Polished £145.00
Black £85.00
Triumph Custom Parts

I hope they are stiffer being stainless, as the RIVCO ones can flex down fairly easily and the silicon pads rub or even disappear and the tip digs into the rear guard if overloaded on long trips.

As I will probably always overload I have since reverted to a microfibre cloth under my roll bag.
The Corbin seat stem rack I have would not have that issue, but does not go with my Russell Daylong that I am reluctant to swap out for even my Corbin Solo. Such conundrums.

I do have a new New Old Stock RIVCO TR3015 Rocket III Swing Arm Cover on its way but it will be a few weeks until I get to check it out and decide if I want to keep it as I have a few pairs of NOS chrome side covers and have a set on the project 'Flamin' Toad' R3R I may match it with. If I go that way I will get the RIVCO Chrome diff ring too.

If I do pass it on I can bundle with my RIVCO Chromed rack if your happy to wait.