Part # for TPS please.

[valmacmiami]

Ian I have the tune ecu can I do an iscv test with that
I tried to reset the secondaries to 100 on the tune edit but not sure how to get that to load
have just removed the flaps for the secondaries

 

[barbagris]

new tps # t 1245113tps

Scott - Have you tried to source one elsewhere? - I can not believe this is anything other than a standard TPS pot. There MUST be number or somthing on the piece itself. Probably find that on from a John Deere fits.

 

[valmacmiami]

My thoughts exactly Barbagris I just replaced a switch on my stove using kenmore part number price was 140$ when I took the thing out I found some numbers on it I googled them and bought from electrical wholesaler for 35 $

 

[valmacmiami]

so if anyone has an old one please send me any numbers on it and I will try and source Triumphs supplier bet its not 104$

 

[tdragger]

TuneECU will also take you through the ISCV test. Just make sure that you are on the TESTS page and not the Diagnostics page.

 

[Captain Rich]

I got a TPS from my dealer in May 2011 and the price was $101.16 w/o tax. P/N T1245113

Stamped on the head of the old part are the following: A28F0A 8Z19C

 

[valmacmiami]

Cheers m8

 

[barbagris]

bet its not 104$

At the most 60. Another interesting thing would be to find one that will meet spec but is generic. I'll bet it'll be better too. BEI SENSORS would be a good start.

 

[valmacmiami]

Since I have removed the secondaries can I use the TPS from there as a spare is it the same

 

[valmacmiami]

triumph quoted 134$ for TPS