Part # for TPS please.

Ian I have the tune ecu can I do an iscv test with that
I tried to reset the secondaries to 100 on the tune edit but not sure how to get that to load
have just removed the flaps for the secondaries
 
warp9.9 said:
new tps # t 1245113tps
Click to expand...
Scott - Have you tried to source one elsewhere? - I can not believe this is anything other than a standard TPS pot. There MUST be number or somthing on the piece itself. Probably find that on from a John Deere fits.
 
My thoughts exactly Barbagris I just replaced a switch on my stove using kenmore part number price was 140$ when I took the thing out I found some numbers on it I googled them and bought from electrical wholesaler for 35 $
 
so if anyone has an old one please send me any numbers on it and I will try and source Triumphs supplier bet its not 104$
 
TuneECU will also take you through the ISCV test. Just make sure that you are on the TESTS page and not the Diagnostics page.
 
I got a TPS from my dealer in May 2011 and the price was $101.16 w/o tax. P/N T1245113

Stamped on the head of the old part are the following: A28F0A 8Z19C
 
Since I have removed the secondaries can I use the TPS from there as a spare is it the same
 
You must log in or register to reply here.

Similar threads

Unknown part found under the seat
Replies
5
Views
741
acim
Operation overhaul starts, first on the menu, TPS settings at closed throttle.
Replies
4
Views
608
Zanx
Identifying this please
2
Replies
16
Views
2K
Mongler07
Error Code P0122 - TPS
Replies
2
Views
954
spb2002
Possibly TPS failure?
Replies
7
Views
1K
Gregger
Menu
Log in
Register