Noltons detent spring fix

[ozrider]

good on you @HansO, at least you have done it before and that makes it alot easier, takes longer to scrap the old gasket off than to do the job.... all for a $3.00 spring

 

[nolton]

Everything went smooth.
After that we pulled the sump pan. It was very clean compared to what I have heard.
WARNING TO EVERONE ON THE SUMP PAN, the bolts are VERY WEAK,!!
I plan to replace them with better bolts.
Then we replaced my fork seals.
That was fun.

 

[mexican]

Everything went smooth.
After that we pulled the sump pan. It was very clean compared to what I have heard.
WARNING TO EVERONE ON THE SUMP PAN, the bolts are VERY WEAK,!!
I plan to replace them with better bolts.
Then we replaced my fork seals.
That was fun.

Way to go brother!!!! Glad you are back on the road!!!

 

[cusso ken]

Well done all y'all yu'uns. Even with all the Yankee know-ho and ingenuity ya still needed an Aussie to git'r'dun. Just like WWI, WWII, and Korea, and Iraq, etc, etc, etc.

You forgot Vietnam,

 

[Rocket Scientist]

Everything went smooth.
After that we pulled the sump pan. It was very clean compared to what I have heard.
WARNING TO EVERONE ON THE SUMP PAN, the bolts are VERY WEAK,!!
I plan to replace them with better bolts.
Then we replaced my fork seals.
That was fun.

How did you remove the old fork seals ? I'm sure I'll have to do mine at some point.

 

[nolton]

How did you remove the old fork seals ? I'm sure I'll have to do mine at some point.

I think Morris used a screwdriver.
I will do a write up on a new thread.

 

[R3Tex]

Putty knife gets the dust seal, then screwdrivers for retainer amd seal

 

[Gregger]

If I knew this was happening I would have came down for the wrenching party...

Probably would have brought your shiny new cordless drill.....

 

[xhdskip]

good job guys.

Guess there's pics of the frontend rebuild too?

 

[nolton]

good job guys.

Guess there's pics of the frontend rebuild too?