**NLA** Rivco Risers for R3 Touring off a 2015

I don't get it. The bar were too wide? How would bringing them back and up fix anything other than the sitting up cruising posture? My issue is that, in the turns, I end up with the inside elbow stuck against my chest.

The width made them too far away, if you turned right, the left side got too far away the risers brought it back.
 
The eBay listing when I look has a banner across the top saying, "This item is out of stock." Perhaps it was listed as a multi-item sale, and the current value is zero.
 
I'm about to take mine off and revert to stock.
I'd like to get rid of mine but don't have the stock riser. I would trade but you have to do the swap. LOL I have desire to move all the cables ect.
 
I'd like to get rid of mine but don't have the stock riser. I would trade but you have to do the swap. LOL I have desire to move all the cables ect.

I found mine for $35. It's in the shop. Recently replaced Yoke bearings became loose.:thumbsdown::thumbsdown: Top tree has to come off so out go the Rivcos. We'll see what the shop say and does about the loose bearings.
 
I'd like to get rid of mine but don't have the stock riser. I would trade but you have to do the swap. LOL I have desire to move all the cables ect.

I still have mine, but they're up in NY, wouldn't be until April I could send them to you, but keep in mind.
 
Silly how the seller used a variations template for a single item. So silly the eBay server cannot compute 0/1 available...says 99% sold.

Anyway, I agree with @Joesmoe that the item is no longer available a.k.a. Sold.
 
Back
Top