newby

Good day fellow triumphalists!
Am trying to communicate using the wonders of a Samsung tablet, please forgive the typos!
I ride a R3 Touring, my son has a speed triple and a Victory Hammer. I have just changed the oil and filter on the R3, and the next job is to fit a Wolo bad boy air horn. The best postion I feel is hanging off the nearsidecrash bar, up by the rad, and I have just purchased a Kurykin 31mm dia chrome clamp to fix this. I have the relay and fuse holder and wiring. If at all possible, I would like to fix a seperate horn button for this, any of you guys done this?
The next project is to add a rev counter, probably buy a second hand one off a R3 Classic, may need some help with the wiring though. Future project will to be improve the aural experiance, I already have TOR pipes, may go with a cat bypass as well. Could do with a few more horses, so remapping is also for consideration. Finally, can I get a center stand for the R3 Touring?
Ride safe
Regards
Tfcrocketman3

Welcome from Downunder. There was a post with instructions on wiring up an air horn on here somewhere. Try the SEARCH button or maybe someone will recall it for you. I can't help at all with wiring up a tacho but someone will know how. As far as I'm aware, if you have TORS on a Touring you already have no cats. What you probably want is a more direct cross over pipe which I think Staintune make for the Touring - again, others (with Tourings) will know more about that. I believe you can get a centre stand to fit the R3T but i recall others saying the problem is that it's almost impossible to get the bike up on it.

No answers, but welcome anyway!:bch:

Welcome from Minnesota
Enjoy the ride