Did a little more research on the new Bonneville's. No thank you. I would be better off buying a older model and modify it myself.
Sounds just like the die hards on the Bonnie forum who still insist if you tune a Bonnie you MUST fit carbs to get power even on EFI's
I have an older model Efi that I modified, it will blow most other Bonnies away & stock R3's too, due to increased power & much reduced weight etc etc.
The New Thruxton I am getting makes around 83 ft lb @ only 5K, never seen that from a street modified Bonnie not even hopped up big valve 1087's.
Ride by wire/rider modes/abs/traction con/showa forks/Ohlins shocks/Brembo brakes, best looking stock bike out there,
What's not to like ?
Sure it is not a high rev/hp motor but it will do VERY well, despite the short sighted naysayers.
I have looked into this engine, head is ripe for flowing/valves/cams, in the winter I will do just that !
Did I mention I like this bike ?
Give the bike a try before sticking the knife in.