Need tune.

[Jeremy]

I think i may have been posting in the wrong spot. I need a tune for an R3T with d&d with baffles removed and a ramair installed. The crossover will come next year i hope.

Im nervous about installing the ramair as I do not want to install without the map. Its going to be beautiful this weekend and i would like to ride. I do not want to put any unneeded stress on the bike with the wrong tune. Can anyone help?

 

[MIG]

As a start take a look at Rocket Tunes .
-MIG

 

[CamaroCarl]

In the resources section at the top there are some tunes you can download. Not as many for the touring as the roadster. Just watch the model years. Different ecus for different years.

 

[Starmanut]

I think i may have been posting in the wrong spot. I need a tune for an R3T with d&d with baffles removed and a ramair installed. The crossover will come next year i hope.

Im nervous about installing the ramair as I do not want to install without the map. Its going to be beautiful this weekend and i would like to ride. I do not want to put any unneeded stress on the bike with the wrong tune. Can anyone help?

I have a 2010 Touring. I just installed TORS and Ramair. I do not have Paul Bryant's crossover. (on my wish list, though).
I just installed the NELS-TORS-K&N/RAMAIR map. I took her out yesterday for the long cruise to get the adaptations finalized.
Works fine and it has a whole lot of power at the top end. I don't know what the gas milage will be as I haven't ran it with that tune very long. (But who cares!! )
I get a buzz when I let off the throttle, not sure where that is coming from, but I think it is the panniers vibrating at a resonance. or maybe I had it with the OEM silencers and it just wasn't loud enough for me to notice with those.

Here's link to the map page:
Touring Tune by Nels at TwoWheelDynoWorks


Don't know if you have used TuneECU, but just in case: "Read" your current map and "Save" it before downloading a new one to the ECU.

 

[Jeremy]

I understand that, thank you! My issue is, since i have the d&d slipons with baffles out, do i treat it like the TORS when looking for maps?

 

[BigNorm]

What Starmanut said. I run the same tune with triple K&Ns and an open pipe.

 

[Jeremy]

I have a 2010 Touring. I just installed TORS and Ramair. I do not have Paul Bryant's crossover. (on my wish list, though).
I just installed the NELS-TORS-K&N/RAMAIR map. I took her out yesterday for the long cruise to get the adaptations finalized.
Works fine and it has a whole lot of power at the top end. I don't know what the gas milage will be as I haven't ran it with that tune very long. (But who cares!! )
I get a buzz when I let off the throttle, not sure where that is coming from, but I think it is the panniers vibrating at a resonance. or maybe I had it with the OEM silencers and it just wasn't loud enough for me to notice with those.

Here's link to the map page:
Touring Tune by Nels at TwoWheelDynoWorks


Don't know if you have used TuneECU, but just in case: "Read" your current map and "Save" it before downloading a new one to the ECU.

I am going to use this tune. Much appreciated. I guess i was worried since i do not have the PB crossover pipe, but since you dont have it either, this should work for me.

 

[Starmanut]

I am going to use this tune. Much appreciated. I guess i was worried since i do not have the PB crossover pipe, but since you dont have it either, this should work for me.

I used it because @BigNorm and @Bedifferent both use it. They are some of the goto guys on here. I figured I could not go wrong since they have similar setups.
Someday I might try to find a Dyno guy and have it custom tuned, but for now I'm good.

 

[Jeremy]

I used it because @BigNorm and @Bedifferent both use it. They are some of the goto guys on here. I figured I could not go wrong since they have similar setups.
Someday I might try to find a Dyno guy and have it custom tuned, but for now I'm good.

Enough reason for me. Thanks.

 

[Jeremy]

I have a 2010 Touring. I just installed TORS and Ramair. I do not have Paul Bryant's crossover. (on my wish list, though).
I just installed the NELS-TORS-K&N/RAMAIR map. I took her out yesterday for the long cruise to get the adaptations finalized.
Works fine and it has a whole lot of power at the top end. I don't know what the gas milage will be as I haven't ran it with that tune very long. (But who cares!! )
I get a buzz when I let off the throttle, not sure where that is coming from, but I think it is the panniers vibrating at a resonance. or maybe I had it with the OEM silencers and it just wasn't loud enough for me to notice with those.

Here's link to the map page:
Touring Tune by Nels at TwoWheelDynoWorks


Don't know if you have used TuneECU, but just in case: "Read" your current map and "Save" it before downloading a new one to the ECU.

I started with this tune and we will see. I did the 12 min tune and all seems fine.

Can anyone tell me if this looks ok?