My Rocket is...

[MiamiDave]

Not running as it should...I've messed with it a bit and it is out of sync. I've also misplaced the manual :?

I've got the tuneboy/PC3 combo.

Can someone get me in line as far as resetting the stepper motor, TPS, and manual throttle settings (which I made some turns, and don't know whether it was positive or negative-so I'm "off" quite possibly forever).

Also, how to import the PC3 map to the Tuneboy...? Sorry, I know it's all here somewhere, but I'm looking to spend less time searching and more time tinkering.

I want to add new plugs, clean the K&N's, go to blais and chop one Jardine, open up BC, and re-dyno tweak as well. Maybe too ambitious for this weekend though...

 

[ATMofMN]

Don't forget to check that tank vent.

ATM

 

[dragline708]

DAVE,

you have a PM

 

[RiderRocketman]

Don't forget to yank out that PCIII once you upload your PCIII Tuneboy tune.

Can't help you much on resetting sensors but to apply your PCIII map, you first gotta find out exactly which Triumph factory tune is in your ECU. Tuneboy can't tell you so you'll have to go from your service records or let the dealer plug in their handheld.

Once you know the exact tune, you can modify the tuneboy file for it and apply the PCIII map to it, then upload and forget about the PCIII unless you have to go dyno with it.

 

[rob o]

what is actualy wrong with your bike!

manual throtle stop is the most inportant and should be where it was origonaly before any adjustments as it changes the off idle fueling

the idle steper motor needs to be where it can self adjust ( trial and error ) unless you have the gameboy

the TPS I havent touched so I dont know but there are 2 , so whitch did you twist

check your front coil mounting bolts (inside the steering head)
they where too long on mine , and make all coil conectors stiff not loose conections

I dont have PC3 or TB but if you have a known tune they should be OK