KnN pods

Grumpy Ole Codger said:
@Nat67
Nat...You know I isn't very mechanically minded and spannering aint my thing, but how do you open the box??
Click to expand...
Aluminium powder , a little potassium permangenate and just a smidgen of yellow sulphur should do the trick ! it will be perfectly fine to do it on the kitchen table , but do wear stout boots !
 
EasTexRIII said:
Just kidding bout the C/B.
I just spit on em & only had to tighten them the one time :cautious:
Click to expand...
I'm sure if you kiss them first , they will be far more responsive ? no wonder they don't leak , they are too scared to . like picking up a bar of soap in a prison shower you old romantic you ! :confused: :inlove
 
Nat67 said:
yep definitely as close to behind 2 and 3 pods and higher as opposed to too near the throttle bodies . if the idle plays up , it's getting too hot so find a way to open it up a bit so the temp inside the little filer is the same as the ambient temp around it or near as poss ? I think you gonna need more than a sat if your relocating the recovery bottle and cutting the bear claw . it's all gonna work out wonderfully.the hardest part is fitting the Samco hoses .KY jelly helps there and there's less chance of it getting pregnant . but you will be tweaking the jubilee clips for a week or two . They are buggers for weeping when new !
Click to expand...


Always found KY very useful too:whitstling:
 
FFS ! Is this what goes on after dark in the toilet :eek::confused::banghead:


Oil-photo-for-Taya.jpg
 
Last edited by a moderator:
I give up I really do...... you have fun talking lubricants, far more important that the natural thing :banghead:
 

Similar threads

GDoggy
Pods on a touring
Replies
4
Views
833
BillyIndiana
BillyIndiana
Back
Top