fastfun
Supercharged
yep, as I said, you have to do the right mathsSays your man who thought they were both 45,95mm
Hydraulic clutch release went pop
- Thread starter R-III-R Turbo
- Start date
R-III-R Turbo
Mine is the biggest :)
- Joined
- Oct 12, 2010
- Messages
- 2,227
- Location
- Ireland
- Ride
- 2472cc Supercharged Carpenter Rocket III Stroker
Found the correct photo, these are the ones I used.
The Viton ones that came with the Oberon slave cylinder ( the ones that are not compatible with DOT 4) were 46 x 2.2mm and 44 x 2.2mm by my measurement (difficult with a squishy o-ring).
And these ones are 46 x 2.0mm and 42 x 2.0mm, but they fit and work fine.
I couldn't find a 44 x 2.0, only a 44 x 2.5mm, which was too thick to fit right.
The Viton ones that came with the Oberon slave cylinder ( the ones that are not compatible with DOT 4) were 46 x 2.2mm and 44 x 2.2mm by my measurement (difficult with a squishy o-ring).
And these ones are 46 x 2.0mm and 42 x 2.0mm, but they fit and work fine.
I couldn't find a 44 x 2.0, only a 44 x 2.5mm, which was too thick to fit right.
