Help with aux light bar

[rreidiii]

I have installed the Eb H4 kit(which was a breeze) and an auxillary light bar where the problem is. Things went pretty smooth until the very end...I think. I believe I located the aux cable from the main harness it is an ovalish conector with purple black and blue wires in that order. Now the aux cable that came with the kit has a rectangular connector where the series is blue purple and black. I have a real dilemma here since I cant put the round peg in the square hole if you know what I mean. Any suggestions and or has anybody else run into this problem or is it just me.
Thanks in advance.

 

[HellFire]

Not knowing if you have the correct parts or not, I'd suggest you keep digging under the tank for correct connector. I know I had to look around a bit for the correct plugs when installing my factory accessories (grip heater and aux lights).

If I remember right, the grip heaters were oval and lights rectangular. Hope that helps.

 

[rreidiii]

I'll look again, I thought I was pretty thorough we'll see.
Thanks

 

[HellFire]

There will be at least two empty plugs under there ... did you find them both?

Maybe even a third for the alarm ... I never looked for that one.

 

[GPMAZ]

The R3T wiring harness does have the correct matching plugs for the Aux lights. Keep digging.

 

[dandiego]

My aux light bar didn't come with the correct cable (dang you, eBay!) but I made it work anyhow.

Keep looking for the connector...it's there.

Or you have a different cable.

Either way, you should be able to get it hooked up in no time.

 

[rreidiii]

I'll try again tonight!

 

[rreidiii]

Here I am again tonight with no luck. I did find two aux. connectors from the main harness and to me there doesn't really seem like there is too much digging to do. I just followed the main cable up from below the tank and all of the connectors are attached except two of them one is an ovalish shapped connector with two female slots and the other is three slotted which again is oval in shape. The part I find baffling is that the three female slotted one has the same wire colors as the aux harness that came with the kit but again they are not in the same order(see above). is there more than three aux. connectors coming out of the main harness that are capped off? If there is I may be missing one but the one with the same color wires seems like it should be it. sigh!

 

[GPMAZ]

There should only be two connectors that fit the aux light connectors. There are other connectors in the harness, the GPS connector being one. I never checked the color of the wires, just found the connectors that fit, plugged them in, and they worked.

 

[rreidiii]

Unfortunately I'm not that lucky. I'm still open to suggestions though.