Fuel pump etc.

[phast3]

Hi Everyone...New to the site, but have had my 05 R3 since new. As a matter fact, it was 1 of the 1st 200 to hit the US. Now 18 yrs and 20k miles later....
she just refuses to start after being stored for a couple of yrs ( my health reasons) . 1st it was the pump not cycling...fix that by smacking the pump relay. Still no start. Drained the old gas.
Same no start condition. Took out the fuel pump assembly.....hoses look like they are melted...sand like particles ( old gas crap) on it.
Question: Where can you get a kit for everything on the the pump plate...... pump, hoses, clamps, filter, regulator and sealing gaskets. Thanks for your input!

 

[R-III-R Turbo]

You could buy the lot from Triumph.
Or you could buy a used fuel pump assembly from a breakers e.g. Pinwall Cycles on eBay, and just get the tank/pump plate gasket from Triumph.
Or you could get a Walbro GSS 342 pump and Mahle KL 145 filter and some 5/16" fuel hose from local auto parts store along with some 13-15mm jubilees/crimp earclamps and do it yourself - but the reg and gasket from Triumph or eBay.

 

[phast3]

You could buy the lot from Triumph.
Or you could buy a used fuel pump assembly from a breakers e.g. Pinwall Cycles on eBay, and just get the tank/pump plate gasket from Triumph.
Or you could get a Walbro GSS 342 pump and Mahle KL 145 filter and some 5/16" fuel hose from local auto parts store along with some 13-15mm jubilees/crimp earclamps and do it yourself - but the reg and gasket from Triumph or eBay.

Thank you very much for the info.