Flips Baggy Challenge

GreyFox

GearHead
Joined
Apr 22, 2006
Messages
149
Location
Cleveland, SC
Ride
Rocket III
Now this is a set of crappy bags so I ordered the Flips fix it kit. Thanks Flip! Now a tire, then some brake line clamps.

The Kit.

What a pain!

A little sun will finish it off.
 
Last edited:
yea, my set looks 100 percent better than before flips fix it kit.
I did have to dremel about 3/8" off the outside of the top run to get it to fit like I wanted it to. What I need now is a hand full of them fancy black 2 piece screws fastners he sends with the kit, cause I want to bend the front and back in and attach them to the sides with a corner bracket so my velcro fits snug and tight.
Ya hearin' me flip? How much to get you to send me about 16-20 of them fancy black do-dads. xhdskip
 
Let me know how many you need via sales@flipmeisters.com and I'll figure a price.

I'll be carrying K&N Filters, the complete set (triples)(single underseat)(oil)(and crankcase breather) filters and recharge kits soon on the website at a reasonable price, of course.

I'm also going to be the Michigan Distributor for Blackrock Leather Care Products. Blackrock Leather-n-Rich is the cats ass for the Panniers. Amy and I have been doing our Draft Harness for years with the stuff, I do my vintage Brooks Leathers and as of late, my Panniers. It makes Lexol look like cat piss in a boot.:eek:

The Panniers in my website picture were cleaned and treated with Blackrock and they look 'new'. They arent, by any means.

Expect the website to expand substantially in the next month.
 
Let me know how many you need via sales@flipmeisters.com and I'll figure a price.

I'll be carrying K&N Filters, the complete set (triples)(single underseat)(oil)(and crankcase breather) filters and recharge kits soon on the website at a reasonable price, of course.

Will you carry any Triple K&Ns that are taller to run without a Bearclaw? Maybe some with chrome or something shiny on the ends so they look cool with NO BEARCLAW

(thats my next step up )
 
Let me know how many you need via sales@flipmeisters.com and I'll figure a price.

I'll be carrying K&N Filters, the complete set (triples)(single underseat)(oil)(and crankcase breather) filters and recharge kits soon on the website at a reasonable price, of course.

Will you carry any Triple K&Ns that are taller to run without a Bearclaw? Maybe some with chrome or something shiny on the ends so they look cool with NO BEARCLAW

(thats my next step up )

In as much as I don't have the filters yet, I'll presume that the filters have no shiny stuff attached. I have the pictures of them all and I see no chrome or stainless.
 
K&N Filter Bags

Flip
Bike 2007 Rocket Classic Touring, TORS, Cat-Elim, with Pig9r O2 tune and sensor removal with K&N under seat filter. I feel the underseat filter is eating a lot of HP. Have purchased my RU2780's for the 3 filter setup. Just a thought my Silverado
pickup has a nice K&N FIPK Cold-Air system to which I added the K&N Filter Charger Bag water/mud proof has worked out fine. For those Rocket owners afraid of getting their filters wet, this would be just the thing. Looking at the K&N catalog I
found no direct match but they also offer custom/universal sizes. Might be something to talk to K&N about now that you have established a working relationship. One additional comment on your web page, post assembly instructions. This makes a lot of folks more likely to buy if they can see the level of work to be preformed. At last I would like to order 3 RU2780 Filter Charger Bags (wet type), color Red.
Drop me a line and let me know what you think. PayPal OK?
mjbell1
Michael Isabelle 772-200-6123
152 Bishop Drive
Framingham, Ma.01702
 
Back
Top