Engine Guard Bars

JoseyR3Wales

Living Legend
Joined
Mar 3, 2007
Messages
4,324
Ride
2014 Victory Vision Tour
Ordered my 1.5 inch bars from Fast Eddy Sports today, highway pegs next. Also bought a set of the extended seat removal bolts. Got to get some air time.
 
my R3T had engine guard bars when I picked it up about two months ago. Triumph highway pegs were already installed. The problem I have is that the bars/pegs aren't very far in front of the floorboard and I have to almost assume a fetal position to use the pegs. Therefore, I don't/can't use the pegs. Anyone know of a good solution? I'm 6' and my inseam is 32".
 
Kurykan or Rivco makes 90 degree arm extenders. Might put the pegs out there another 4-5 inches for you?
 

Mine are Triumph swivel mounts and I have plenty of adjustment. I might have located them a little different than the dealer, but once they are mounted they put a small indentation in the highway bar. I decided not to move them but rather just shift the position and angle a bit. If folded all the way in, they are a bit close to the brake pedal, so I don't bring them quite all the way in.
 
My engine guards are now back ordered. Thanks Fast Eddy Sports.
 
I had the swivel adapter on mine. I have a 34 inch inseme but mine were turned backwards to make them more comfortable. Just play with them .It will work trust me.
 
JoseyR3Wales said:
Engine guard bars are in but not on.
Click to expand...

FYI, Amigo.
If you've not installed these before . . .
Use a jack to hold the engine in place vertically before removing the long mount bolt.
This will much facilitate replacement when mounting the engine guards.
 
You must log in or register to reply here.

Similar threads

Engine guard bars anyone ?
2
Replies
15
Views
3K
JoseyR3Wales
Engine light on
2 3 4
Replies
38
Views
5K
DEcosse
Menu
Log in
Register