Electric question

ArekDeBoss

Turbocharged
Joined
Apr 12, 2018
Messages
934
Location
Lalaland
Ride
Rocket 3 GT 2022
I can not locate relay for indicators.
I have located few but they seem way too small. Please see a picture.
I can not find in a manual a location for indicators relay anywhere.
Can somebody help?
It's for sequential LED indicators which even with resistors flash normal frequency but only half way through.
When connected directly to the battery they flash fine. When connected to old indicators plugs they don't. Not at all until added resistors. Then after that only half a way. So I need to locate a relay.
Help please
Forgot to mention it's 2021 GT rocket
 

Attachments

  • IMG20240330131043.jpg
    241.5 KB · Views: 38
Last edited:
There is NO relay in this bike for blinkers.
There is also NO any light switch for brake lights, no where on brake lever or elsewhere.

The BINLKING SIGNAL is sent by instrument/dash.
Brake lights are also controlled by instrument/dash+ ABS module ECU.

So far no person has been able to install sequential indicators, hope you become the first one.

Good luck
 
Last edited:
Are you being serious? All this digging and disassembling for nothing?
 
Never give up, how about in line diode like we have to do on touring.
 
ArekDeBoss said:
Are you being serious? All this digging and disassembling for nothing?
Click to expand...
you should have looked at manual>electric circuit diagrams> rear light +turn indicators before started opening things, yes, I am serious.
 
Kevin frazier said:
Never give up, how about in line diode like we have to do on touring.
Click to expand...
Somethings are meant to give up, CAN BUS in encrypted so even professional companies are unable to add extra rear brake lights to this bike. Same goes for sequential blinkers, even ABS bleed is not possible with tuneeecu and 'dealertookUK' aftermarket software, I bought both and asked them why ABS bleed does not work and they said 'sorry'. I have emails from them.

I am waiting, looking here and there on FB etc, maybe someday someone will figure this canbus stuff.

Turn signal help

Hello all! So I'm posting up to see if anyone has any ideas or experience with my problem. I installed aftermarket led turn signals while moving my plate. The turn signals at first switch will run normal for 3 or 4 cycles. Then it will just shut off the rear signal lights and pop up an error...
www.r3owners.net
 
ArekDeBoss said:
Are you being serious? All this digging and disassembling for nothing?
Click to expand...
At least you got to see the guts…Triumph does make a set of scrolling indicators for the bike and I understand they have to be activated in teh software by the dealer before they will work properly. You might just need a software udpate. I had a similar thing on my Zero EV motorcycle when going from regular incandescent bulbs to the LED. The dealer just flipped a bit in the software to account for the resistance change so the computer knew the lights were working as normal.
 
Will call them to ask
 
You must log in or register to reply here.

Similar threads

ELECTRICAL THINGY
Replies
5
Views
229
Steff
Gearbox rebuild question
Replies
0
Views
366
bebsy
Need Electrical Help
2
Replies
11
Views
1K
RockOn
Backrest Question
2
Replies
12
Views
2K
1olbull
Key Question if Fob Fails
Replies
8
Views
1K
Journeyman
Menu
Log in
Register