Drive shaft spline lube

Kevm said:

well mine was about £19 for 100g once you add post and VAT. So yours is cheaper per gram but then again It'll take me years to use 100g let alone half a litre ...

Click to expand...

Mike Rocket said:

Was it expensive in relation to what you get in the can? My moly paste cost me £50 for less than 1/2 litre and it's from a UK supplier.

Click to expand...

cootertwo said:

Just got done doing one of mine, with Caterpillar copper based never seize. And it is a slight ***** getting the splines lined up on the go back together. I'd read about using string, but wound up wadding up the end of the string enough to push under the spline shaft, and after some wiggling and cussing, got her engaged, then was able to pull the string wad out.

Click to expand...