Disassembling wire connector

BigNorm

Boobie Inspector
Joined
Apr 30, 2016
Messages
3,430
Location
Minden, NV, USA
Ride
2014 Rocket 3 Touring
@DEcosse help!
20170424_112650.jpg
 
But now here's the real trick....can you put it back together....and do it with the wires in the right order!:confused:
 
Glad you got the removal figured out
You actually have 'Top' designated inverted but doesn't matter as long as consistent from dis-assembly to re-assembly
The Green/Red is Terminal '1' and I would typically hold that inverted from your image view with the latch tab face being the 'top'
 
Is there a tool that would make this easier? The last 3 are being a PITA. And I have one more plug after this.
 
I have to extend my wires 7" for the risers I made. I am having a custom length brake line made as well. Throttle and clutch cables were the easy part. I just ordered those 7" longer than stock.
Screenshot_20170410-161046.png
 
Back
Top