Disassembling wire connector
- Thread starter BigNorm
- Start date
BigNorm
Boobie Inspector
Never mind. I figured it out. I just had to have some patience.
rocketjohn
Top Fuel
But now here's the real trick....can you put it back together....and do it with the wires in the right order!
BigNorm
Boobie Inspector
YES!But now here's the real trick....can you put it back together....and do it with the wires in the right order!
DEcosse
If it's no Scottish it's CRAP!
Glad you got the removal figured out
You actually have 'Top' designated inverted but doesn't matter as long as consistent from dis-assembly to re-assembly
The Green/Red is Terminal '1' and I would typically hold that inverted from your image view with the latch tab face being the 'top'
You actually have 'Top' designated inverted but doesn't matter as long as consistent from dis-assembly to re-assembly
The Green/Red is Terminal '1' and I would typically hold that inverted from your image view with the latch tab face being the 'top'
BigNorm
Boobie Inspector
Order. Sorry I'm late
BigNorm
Boobie Inspector
Is there a tool that would make this easier? The last 3 are being a PITA. And I have one more plug after this.
BigNorm
Boobie Inspector
I have to extend my wires 7" for the risers I made. I am having a custom length brake line made as well. Throttle and clutch cables were the easy part. I just ordered those 7" longer than stock.
