Changed rear light and indicators for combo unit -Ahhhhhhhhhhhhh!

[HIM57]

Me again....

Did the above and flashers work fine - but that's it.

No brake light
No rear light
No number plate light

I realize that both flashers - brake and rear light along with number plate have seperate grounds.

The unit I purchased has only the one ground. Does this mean tying all my existing grounds to the one
on the new unit?




Red blue orange black Yellow wires from unit

 

[barbagris]

Did you test prior to fitting?

 

[HIM57]

Did you test prior to fitting?

Did a direct hookup to battery (removed from bike) all worked fine.

 

[barbagris]

Did a direct hookup to battery (removed from bike) all worked fine.

Then all you should need to do is match the wires up. Ground is ground.

As Triumph seem to be occasionally a bit haphazard with the wiring (esp rear indicators) - I would suggest you beg/steal/borrow a multimeter if you don't have one.

Have a wiring diagram in colour with labels.

 

[HIM57]

Then all you should need to do is match the wires up. Ground is ground.

As Triumph seem to be occasionally a bit haphazard with the wiring (esp rear indicators) - I would suggest you beg/steal/borrow a multimeter if you don't have one.

Have a wiring diagram in colour with labels.

Good on ya mate!