Changed rear light and indicators for combo unit -Ahhhhhhhhhhhhh!

HIM57

.040 Over
Joined
Jul 1, 2018
Messages
60
Location
Rancho Cucamonga, CA
Ride
2008 Triumph Rocket 3 Classic
combo1.JPG Me again....

Did the above and flashers work fine - but that's it.

No brake light
No rear light
No number plate light

I realize that both flashers - brake and rear light along with number plate have seperate grounds.

The unit I purchased has only the one ground. Does this mean tying all my existing grounds to the one
on the new unit?

combo1.JPG


Red blue orange black Yellow wires from unit
 

Attachments

  • combo1.JPG
    combo1.JPG
    23 KB · Views: 2
  • combo1.JPG
    combo1.JPG
    23 KB · Views: 2
Did a direct hookup to battery (removed from bike) all worked fine.
Then all you should need to do is match the wires up. Ground is ground.

As Triumph seem to be occasionally a bit haphazard with the wiring (esp rear indicators) - I would suggest you beg/steal/borrow a multimeter if you don't have one.

Have a wiring diagram in colour with labels.

Rocket3 Electrical Diagram - Labelled.png
 
Then all you should need to do is match the wires up. Ground is ground.

As Triumph seem to be occasionally a bit haphazard with the wiring (esp rear indicators) - I would suggest you beg/steal/borrow a multimeter if you don't have one.

Have a wiring diagram in colour with labels.

Rocket3 Electrical Diagram - Labelled.png


Good on ya mate!
 
Back
Top