cardan/swingarm frame disassembly

legsroses

Supercharged
Joined
Mar 6, 2012
Messages
213
Hi,
I need work on cardan/swingarm for other paint apply. So I ask some suggest you to be sure I'm proceeding correctly. Waiting for you precious help.
Bye Bye

I used this one http://shop.becker-technik.de/en/motorbike-lifters/55-triumph-rocket-3-lifter.html
I must remove rear axle wheel with double shock absorbers. So I should left side bolt frame placed, then swingarm adjuster assy too with T2057122 code.

I should something else now or however I must except some impediment.
Lifter I put will be sufficient for hold my bike since it's without wheel support.
 
I think you may struggle using that Becker Technik lift by itself.

#6 in image below
Swingarm adjuster assy T2057122



What about?

1 Swingarm Assy T2057031
BACK ORDER NO STOCK
€824.45 inc. VAT (£708.90)

2 BRG/SEAL,TAPER ROLLER,174013 T3800062
1-3 IN STOCK
€43.31 inc. VAT (£37.24)

3 Rubber Boot T2057019
1-3 IN STOCK
€27.16 inc. VAT (£23.35)-

4 Bolt, HHF, M18 x 58 T3330258
BACK ORDER NO STOCK
€17.98 inc. VAT (£15.46)
USD prices shown are approximate
Swinging Arm - Triumph ROCKET III, CLASSIC & ROADSTER | Triumph ROCKET III, CLASSIC & ROADSTER Swinging Arm Con consegna rapida a Italia | Fowlers Parts

 
for lifter no problem since I got help friend of mine.
ok for T2057122 for it's code I thought too.
know you left bolt code, it's opposite side with T2057122
I highlight it in green on file you will see.

is there something else, removed these ones bolts, I should.
or however some impediment I should expect.

sorry if I don't reply on 6000 post until eggs, so sincerely I don't understood nothing
 

Attachments

  • Frame.jpg
    38.2 KB · Views: 36
sorry if I don't reply on 6000 post until eggs, so sincerely I don't understood nothing
Click to expand...
That is my signature block appearing under every one of my posts.
Gold!

Questo è il mio blocco di firma che appare sotto ogni mio post.
oro!

Back on topic.

Main Frame & Fittings - Triumph ROCKET III, CLASSIC & ROADSTER | Triumph ROCKET III, CLASSIC & ROADSTER Main Frame & Fittings Con consegna rapida a Italia | Fowlers Parts


5 Bolt, HHF, M12 x 70, Silver T3150316
Condividi questa parte
back order NIENTE SCORTE
€8.19 inc. VAT (£7.04)

 
Last edited:
If you do not have a big enough Allen key to remove Part#6 use a hex bolt head that fits and put 2 or 3 nuts on the bolt and lock against each other.

Se non si dispone di una chiave Allen abbastanza grande per rimuovere la parte 6 utilizzare una testa di bullone esatra che si adatta e mettere 2 o 3 dadi sul bullone e bloccare l'uno contro l'altro.
 
You possibly may have to remove the plastic and steel inner frame brackets and some electrical cables, brake and ABS components.

Hopefully the more familiar will post a reply. e.g. @warp9.9 , @Claviger , @Mittzy

Potrebbe essere necessario rimuovere le staffe del telaio interno in plastica e acciaio e alcuni cavi elettrici, freni e componenti ABS.
Speriamo che il più familiare pubblicherà una risposta. ad esempio
 

I think/hope friend of mine own it or I will buy it
 

I believe too will need to be removed something else.
I hope too somebody else will give us some others reply.
nice weekend for you
 
You must log in or register to reply here.

Similar threads

Swingarm bearings
Replies
3
Views
1K
Mittzy
Menu
Log in
Register