cardan/swingarm frame disassembly

[legsroses]

Hi,
I need work on cardan/swingarm for other paint apply. So I ask some suggest you to be sure I'm proceeding correctly. Waiting for you precious help.
Bye Bye

I used this one http://shop.becker-technik.de/en/motorbike-lifters/55-triumph-rocket-3-lifter.html
I must remove rear axle wheel with double shock absorbers. So I should left side bolt frame placed, then swingarm adjuster assy too with T2057122 code.

I should something else now or however I must except some impediment.
Lifter I put will be sufficient for hold my bike since it's without wheel support.

 

[Ishrub]

I think you may struggle using that Becker Technik lift by itself.

#6 in image below
Swingarm adjuster assy T2057122

What about?

1 Swingarm Assy T2057031
BACK ORDER NO STOCK
€824.45 inc. VAT (£708.90)

2 BRG/SEAL,TAPER ROLLER,174013 T3800062
1-3 IN STOCK
€43.31 inc. VAT (£37.24)

3 Rubber Boot T2057019
1-3 IN STOCK
€27.16 inc. VAT (£23.35)-

4 Bolt, HHF, M18 x 58 T3330258
BACK ORDER NO STOCK
€17.98 inc. VAT (£15.46)
USD prices shown are approximate
Swinging Arm - Triumph ROCKET III, CLASSIC & ROADSTER | Triumph ROCKET III, CLASSIC & ROADSTER Swinging Arm Con consegna rapida a Italia | Fowlers Parts

 

[legsroses]

for lifter no problem since I got help friend of mine.
ok for T2057122 for it's code I thought too.
know you left bolt code, it's opposite side with T2057122
I highlight it in green on file you will see.

is there something else, removed these ones bolts, I should.
or however some impediment I should expect.

sorry if I don't reply on 6000 post until eggs, so sincerely I don't understood nothing

 

[Ishrub]

sorry if I don't reply on 6000 post until eggs, so sincerely I don't understood nothing

That is my signature block appearing under every one of my posts.
Gold!

Questo è il mio blocco di firma che appare sotto ogni mio post.
oro!

Back on topic.

Main Frame & Fittings - Triumph ROCKET III, CLASSIC & ROADSTER | Triumph ROCKET III, CLASSIC & ROADSTER Main Frame & Fittings Con consegna rapida a Italia | Fowlers Parts


5 Bolt, HHF, M12 x 70, Silver T3150316
Condividi questa parte
back order NIENTE SCORTE
€8.19 inc. VAT (£7.04)

 

[Ishrub]

If you do not have a big enough Allen key to remove Part#6 use a hex bolt head that fits and put 2 or 3 nuts on the bolt and lock against each other.

Se non si dispone di una chiave Allen abbastanza grande per rimuovere la parte 6 utilizzare una testa di bullone esatra che si adatta e mettere 2 o 3 dadi sul bullone e bloccare l'uno contro l'altro.

 

[Ishrub]

You possibly may have to remove the plastic and steel inner frame brackets and some electrical cables, brake and ABS components.

Hopefully the more familiar will post a reply. e.g. @warp9.9 , @Claviger , @Mittzy

Potrebbe essere necessario rimuovere le staffe del telaio interno in plastica e acciaio e alcuni cavi elettrici, freni e componenti ABS.
Speriamo che il più familiare pubblicherà una risposta. ad esempio

 

[legsroses]

That is my signature block appearing under every one of my posts.
Gold!

Questo è il mio blocco di firma che appare sotto ogni mio post.
oro!

Back on topic.

ok

 

[legsroses]

5 Bolt, HHF, M12 x 70, Silver T3150316
Condividi questa parte
back order NIENTE SCORTE
€8.19 inc. VAT (£7.04)

well

 

[legsroses]

If you do not have a big enough Allen key to remove Part#6 use a hex bolt head that fits and put 2 or 3 nuts on the bolt and lock against each other.

Se non si dispone di una chiave Allen abbastanza grande per rimuovere la parte 6 utilizzare una testa di bullone esatra che si adatta e mettere 2 o 3 dadi sul bullone e bloccare l'uno contro l'altro.

I think/hope friend of mine own it or I will buy it

 

[legsroses]

You possibly may have to remove the plastic and steel inner frame brackets and some electrical cables, brake and ABS components.

Hopefully the more familiar will post a reply. e.g. @warp9.9 , @Claviger , @Mittzy

Potrebbe essere necessario rimuovere le staffe del telaio interno in plastica e acciaio e alcuni cavi elettrici, freni e componenti ABS.
Speriamo che il più familiare pubblicherà una risposta. ad esempio

I believe too will need to be removed something else.
I hope too somebody else will give us some others reply.
nice weekend for you