Beware tonic #386 - Drink at your own risk

[biker1059]

When I got my bike back from the dealer it did have a high idle on the way home, took a long time to come off of 2k rpms. At a stop light on the way home the temp light came on but went right back off when i got going. After I got home,150 miles later, I noticed that the fan had not been plugged in from the repair work. So I plugged the fan in did a 12 minute tune and the bike has been flawless ever since. I guess what I'm saying is to try the 12 minute tune and see if it helps it sure not going to hurt.

 

[ephraim]

Biker,

I read your experience on another topic and plan to try that tomorrow morning. That would be great if it worked.

 

[RiderRocketman]

All else fails, remove the idle stepper motor and ditch computer idle. I posted a how-to in the how-to section if you want to do that.

 

[ephraim]

I did the 12 minute reset on the ECU as per Biker1059's recommendation - no change however

 

[JT]

I had 386 loaded on Saturday and can't detect any changes in idle or running on the road. Noprobs so far.

I had mine done on Saturday as well....no probs thus far. I sense that it picks up a little smoother in higher gears though.

 

[Jimmy Rocket]

On the way back from RideLikeaProWestCoast I noticed high idling as I was changing gears, stopping at red lights, etc.

I reloaded 1fasthombre a few minutes ago. I don't know the result yet but will say so after a "spirited" ride.

Funny, I don't remember any idle problems before fix 386.

 

[Jimmy Rocket]

I had the 386 "fix" a couple of weeks ago. On the way back from RideLikeaProWestCoast yesterday I noticed high idling as I was clutching to change gears, stopping at red lights, etc.

I reloaded 1fasthombre a few minutes ago. I don't know the result yet but will say so after a "spirited" ride.