I want to remove my datatool s4 alarm from my 07 Rocket 3 Classic.
Does anybody know which 2 pairs of wires need to jumpered together on the bikes wiring harness to allow you to remove the alarm?
You should be able to get a blanking plug through your dealer but it may take a little while.
I'll see if I can find out tomorrow which wires you need to jump.
That would be great if you can see what pins are jumpered.
I have read it's either pins 1&2, and 3&5 or 3&6.
I have called my local dealer and there pretty much clueless. Had no idea what I was talking about. Told me the only thing they can sell me was a new alarm kit.
If anybody has a blanking plug that you can take a look at and let me know which pins are jumpered i would be forever in your debt!
The alarm has been giving me fits lately.
The latest "issue" is the fobs will not communicate with the unit, and I can not get the unit into the set-up or commissioning mode to try an re-establish communication-All new batteries in the fobs, the bike is always on a battery tender and the bikes battery is in great shape.
I may get a different alarm in the near future. Just don't know which one. One that I hope will have more options and easier to deal with.
Lastly, in my neck of the woods, the Rocket 3 is one of the 10 least bikes to be stolen. So the possibility of it being stolen while I'm out is pretty slim, and I keep her in the garage at night.