ABS Rear Brakes

boogerdave

Nitrous
Joined
Oct 5, 2007
Messages
1,101
Location
Holt Florida
I need a little help on this one . .
I recently changed out the rear pads on my 2014 R3T . . no big deal. Soon after that my ABS light started coming on a few miles into the ride. Could squeezing the pucks back in have caused an issue with the ABS? Anyone else had an issue?
 
I did not have that issue when I changed mine, sorry can't help on this one.
 
Likely need to bleed and then use the "Dealer Tool" to bleed the ECU.
 
Dave you should have changed your pads at sea level not in the high elevation where Holt sits, try disconnecting the battery for a few minutes see if that clears it , just changing the pads should not cause it -it never has mine.
 
Scot . . yours doesnt have ABS so I can understand why.

I took the sensor out yesterday, cleaned it off and bled the brakes. We'll see what happens when I take it out today. No codes with regular scanner.
 
boogerdave said:
Scot . . yours doesnt have ABS so I can understand why.

I took the sensor out yesterday, cleaned it off and bled the brakes. We'll see what happens when I take it out today. No codes with regular scanner.
Click to expand...
See what happens when you are out the loop for a wee while, true my 2005 does not have ABS but my 2011 Roadster does, I was up in your neck of the woods riding today .
 
You must log in or register to reply here.

Similar threads

Hi Again F0lks:: Interlocking brakes
Replies
3
Views
486
1olbull
Is it really necessary to bleed ABS when maintenance bleeding of brakes for R3T
Replies
4
Views
893
ZoneIII
ABS intermitent fault
2
Replies
10
Views
897
2023R3GT
ABS light is on
Replies
3
Views
733
Oldman68
Rear tire puncture - any emergency advice?
2
Replies
15
Views
1K
cootertwo
Menu
Log in
Register