火箭三R中气缸压缩为零。有人知道原因吗？

[rick danger]

It appears there's some skilled & proficient hands at work fixing this bike. Good on you mate.

Yup, a little oil in the cam journals before reinstall. . Not the first time doing this.

 

[JAPANユーザー]

Triumph Rocket 3R clearance adjustment completed, assembly in progress

 

[JAPANユーザー]

injector and muffler assembly in progress

 

[JAPANユーザー]

I just installed the fuel tank and tried to start it for the first time. It went smoothly. However, a new problem seems to have appeared. The throttle seems to be difficult to control. It returns very slowly when I turn it gently. The fault code p0068 still appears after I delete it. It's a headache.

 

[TURBO200R4]

Use the adjusting on the cables to shorten the throttle cables till you have free play in both cables.
This might be the problem with tight cables.

 

[imcool]

Use the adjusting on the cables to shorten the throttle cables till you have free play in both cables.
This might be the problem with tight cables.

its ride by wire, there is no cable for throttle on newer rockets 2.5L

 

[OldBiker72]

Use the adjusting on the cables to shorten the throttle cables till you have free play in both cables.
This might be the problem with tight cables.

Don't think there are cables - ride by wire...

 

[TURBO200R4]

Hope this helps

check vacuum hoses this may cause it to fall (slow down) on its face b4 accelerating
electric connectors

 

[JAPANユーザー]

Hope this helps

check vacuum hoses this may cause it to fall (slow down) on its face b4 accelerating
electric connectors

thank you

 

[JAPANユーザー]

Thank you all for your advice and help, the car has been repaired!