火箭三R中气缸压缩为零。有人知道原因吗?

Un huh- what kind of "car?"
IMG_7077.jpeg
 
When I started the car, I heard an unusual exhaust sound and the instrument panel light came on. The computer detected the fault code P0068. I touched the exhaust pipe and the middle temperature was very low, so I concluded there was a problem with the middle cylinder. Test results: The compression value of the middle cylinder was 0.

I'd be surprised it would run on two cylinders. Something sounds off on this 🤔
 
My take on this is if you really have zero pressure in #2 it's take the head off time & see what the hell has happened. Bore scope at a minimum
I have looked with an endoscope and the cylinder looks normal and the valves look OK.I don't dare to disassemble it easily because I don't have the professional repair tools for this motorcycle. A repair shop in Japan might cost 1 million yen.
 
I have looked with an endoscope and the cylinder looks normal and the valves look OK.I don't dare to disassemble it easily because I don't have the professional repair tools for this motorcycle. A repair shop in Japan might cost 1 million yen.

Can you give us more information, including....

- How many miles on the bike - out of warranty?
- Before the problem started were you flogging it (running really hard, redlining...)
- Will it still start?
- Send a video of it attempting to start and/or run.
 
I have looked with an endoscope and the cylinder looks normal and the valves look OK.I don't dare to disassemble it easily because I don't have the professional repair tools for this motorcycle. A repair shop in Japan might cost 1 million yen.
probably start investing in tools if you plan to keep the bike.
 
I'm watching this post to see where it goes 🤔

The new Rockets have decompressors. These keep the exhaust valves open before startup to make turnover easier. I suspect that might be the case here. This drove me crazy when I was first checking valve clearances, as some were waaaayyyyy to open. If the cylinder in question is in position for the exhaust valve to be be closed while running, but it is not running, that valve will be propped open and that would give you zero compression.

it seems to me that no one is paying any attention to this important post
witch means that you can not rely on the compression test.
 
Back
Top