Search results for query: *

  1. REBLX136

    Corbin Gunfighter

    The seats are obviously poorly moulded, i have adjusted the bumpers the bear the weight as best as i can but the flex required to fit correctly is clearly not right. So far i have had 4 corbins on various bikes but this will be my last.
  2. REBLX136

    Corbin Gunfighter

    Anybody that’s had a Corbin gunfighter for a while, have you removed it and checked the state of the rubber mounts? The reason I ask is there is clearly a misalignment at play, the front mounts sit a good half inch back from the pads at the nose meaning the nose is unsupported and the rear set...
  3. REBLX136

    Forward Controls

    The heat shields have always been different between the R and GT to account for the possible leg contact with the headers in the forward position.. the Gt covers look better in my opinion.
  4. REBLX136

    Clutch Bark

    Just for clarity it’s not a chatter and it’s very brief just at the point the clutch is engaged then stop once underway.
  5. REBLX136

    Clutch Bark

    😂😂 it’s more akin to an out of breath bulldog. I’ll change the oil and see if it changes anything.
  6. REBLX136

    Clutch Bark

    For me it wasn’t present from new and only raised its head at just over the 6k mark after coming back from a 1000mile run to the coast, like I said above it seems to have zero effect on actual operation but was concerned that it was the start of an issue, coming from the previous Gen Rocket...
  7. REBLX136

    Clutch Bark

    Bark is the best description I can muster, accompanied by a vibration through the lever just at the point of of engagement, it’s not chatter or basket rattle and can be held for a brief period in the range that produces the noise,it cannot be reproduced in motion and has no immediate effect on...
  8. REBLX136

    Clutch Bark

    I only get the vibe through the lever and it’s not apparent when moving, just at bite, it’s not basket rattle though.
  9. REBLX136

    Clutch Bark

    Yeah it’s an odd one, mine didn’t come on until she had 6k on the clock so it’s not normal, I’ll get Triumph to have a butchers in a few weeks, I know a bloke that had his clutch replaced on a new machine for this very thing!
  10. REBLX136

    Handle bar of the GT on a Rocket 3 R

    That was my first option and ordered the GT but the delivery date kept moving forward a month at a time so I changed my order to the R and fitted the heated grips GT seat and Bars. It’s an expensive way to do it but I’m not very patient and I’d already sold my previous Rocket.
  11. REBLX136

    Handle bar of the GT on a Rocket 3 R

    I bought the GT bars plus fitting kit which includes both lines.
  12. REBLX136

    Handle bar of the GT on a Rocket 3 R

    for me it was a little uncomfortable with the GT Bars and R seat, the r seat pushes you forward and with out the shorter bars make for a weird position. I’m 5”10’.
  13. REBLX136

    Handle bar of the GT on a Rocket 3 R

    I have the GT bars on my R with the GT seat and for me it’s bob on.
  14. REBLX136

    Clutch Bark

    I’ve noticed a slight bark in the clutch on take off just as it picks up the bite in first, it’s not constant and doesn’t matter if she’s hot or cold, I can feel the bark through the lever and it repeatable but not consistently, shifting isn’t effected. Anyone else experience similar, she has...
  15. REBLX136

    KR-techno carbon bits!

    Yeah same, I have some bits from KR techno too but the quality isn’t commensurate with the premium price that he charges. Thought I’d give CarbonFBR a shot.
  16. REBLX136

    Quick Shifter Installed R3 GT

    I’m starting to feel like the issue is with dealer ability and due diligence during installation and calibration, the results are to varied for it to be limited to a less then optimal part.
  17. REBLX136

    Quick Shifter Installed R3 GT

    If the dealer can’t square it away I’ll be removing it, it’s not worth it and has very little purpose if that’s the best it works but as others have said it’s smooth I’ll persevere and see how it goes.
  18. REBLX136

    Quick Shifter Installed R3 GT

    It’s possible the tech didn’t set it up correctly, I’m going to let them know the score and see what there response is. I have a choice of dealers near me so it shouldn’t be hard to get it squared away.
  19. REBLX136

    Quick Shifter Installed R3 GT

    Yeah it’s not smooth at all, with the throttle pinned you can feel it cut the ignition then hook the gear and it surges, down is better obviously with the speed matched, at slower speed it does the same but defo lurches into gear as opposed to slides in.
  20. REBLX136

    Quick Shifter Installed R3 GT

    I had mine fitted today and to be fair I’m not that impressed, it’s lumpy at best, bit of fun when punching it but I’d say it’s far from smooth, it’s enabled in the menus so unless the tech didn’t set it up correctly it’s not all that.
Back
Top