Search results for query: *

  • Users: flash
  • Order by date
  1. flash

    Tune for turbo required.

    Ok i have a little tuning issue , i have raised the f trim values 15 % from 2000rpm up and and above 3% throttle position . Thats all fine im running in the 12 's afr range when giving it to her. My question is how do i adjust the idle afr as its running rich at 11.1 to 1 , I tried dropping the...
  2. flash

    Tune for turbo required.

    Thanks for that Warp, i have been reading up on the Pcv and auto tune would the auto tune be worth getting or should i just get it dyno tuned . Not sure if the auto tune works with boost but sounds like it might if it reads the map sensor thats still in range.
  3. flash

    Tune for turbo required.

    Hi i have just installed a turbo running at about 5 psi , I have fitted an innovate o2 gauge to monitor afr. I have a rising rate fpr fitted as well. Does anyone know of or can recommend best tune or tuning process . I have tunecu capability as well. Thanks.
  4. flash

    Time for turbo install

    Ok guys just an update i have fitted the exhaust , managed to pickup a cheap straight through resonator off an Audi that matched the same pipe diameter. I welded an oxygen sensor bung on it aswell. I have plumbed in the intercooler as well and fitted a couple of vac/boost lines one to the...
  5. flash

    Time for turbo install

    Thanks for that Neville i definately wont put it in there then as i dont want her leaning out.
  6. flash

    Time for turbo install

    Hi guys thanks for all the comments and support , im plumbing in the intercooler atm just wandering how important is the air temp sensor , ? Does it need to be in the intake system . ? I know i have to tap in to supply boost reading to the turbo exhaust bypass actuator and to the boost gauge...
  7. flash

    Time for turbo install

    Hi BigNorm I bought the prohauler when i was 23 second hand for $500 , since then it has been used in the market garden carrying veges around. My boys a few years ago blew up the motor so it was time to find another shaft drive motor , the rocket 3 motor was available so i bought it for $ 800 ...
  8. flash

    Time for turbo install

    Ok just giving an update i spoke to James from S and R who make the kit , he says they dont worry about running the water cooling and being a ballbearing turbo the oil feed is enough. He uses the sandwhich plate and for the return line they use a little canister with its own oil pump. So.this is...
  9. flash

    Im back

    Im in Perth Western Australia.
  10. flash

    Im back

    Thanks for those responses guys ,
  11. flash

    Time for turbo install

    Hi Claviger thanks for the response , i will tackle the tuning down the track i do have tuneecu capability and also know someone with a quad bike dyno . I do intend on intercooling i have a little intercooler that i will plumb into the front of the bike. Thats great advice on type of tubing for...
  12. flash

    Time for turbo install

    Yes its between the engine and turbo on the turbo of course..
  13. flash

    Im back

    Hello to all fellow big cube bike riders, its been a few years since i have posted and now its time to get the old girl ripping again with a few more horses. I transplanted the rocket 3 into my yamaha prohauler farm quad and she has been a blast , my boys and there mates just eat my dust...
  14. flash

    Time for turbo install

    Thanks for that , thats very helpfull i am pretty sure it has an oil feed restrictor already on the turbo as its a small hole on the feed side. I have bolted it in temp and it appears to be a kit from S and R products.
  15. flash

    Time for turbo install

  16. flash

    Time for turbo install

    Hi i havent posted for awhile but have recently scored a turbo and exhaust manifolds to suit the rocket 3. Its not in kit or anything so i was hoping if anyone can help me with the oil and water feed and return plumbing to the turbo. ? Thanks in advance.
  17. flash

    What tune can i get away with 8psi boost.

    Thanks for the input what ever i end up doing i will set up a wideband o2 sensor and gauge to keep an eye on the afrs . The bike has plenty of go I came second at the dirt drags only to be beaten a bike length away by a 1000 cc r1 quad on nos . A few extra ponies and i would have smoked it.
  18. flash

    What tune can i get away with 8psi boost.

    Wow I didnt expect that reply, thankyou very much for all that information its obvious I need to learn a lot more about tuning. I have fitted a supercharger running 6psi boost to my 4lt lexus v8 ute and buggy and got away with just adding a rising rate fpr leaving the stock ecu to take care of...
  19. flash

    What tune can i get away with 8psi boost.

    This is the kit that i scored i have to build by own intake plenum and i am going to run an intercooler at the front. Thanks for the replies it sounds that the tune ecu can give me what i want.
  20. flash

    What tune can i get away with 8psi boost.

    I have managed to score a used turbo kit for my rocket 3 engine, but before i start installing it i would like to sort out what tuning i require. I have tune ecu capabilities and a bosche 044 external fuel pump already running . Was hoping to just fit a rising rate fpr and utilizing the tune...
Back
Top