Recent content by Matt15

  1. Rocket 3 2006 Clutch Problems.

    Alright I just want to say thankyou to everyone who helped me out. It turns out the clutch packs were stuck from sitting. A few Rocks back and forth in gear with the clutch pulled in sorted it. Thanks again for all your suggestions. Very much appreciate it.

  2. Rocket 3 2006 Clutch Problems.

    Appreciate the Replies Folks. I have a feeling that possibly the clutch pack is stuck from not being ridden for 6 months as ozrider stated. I think I should reinstall the clutch cover and adjust the clutch cable and lever correctly. Then possibly try ozriders idea or put the bike in gear (whilst...

  3. Rocket 3 2006 Clutch Problems.

    The cover is still off. I haven't checked the clutch pack as I'm not sure what to look for or what to do?. I'd be very surprised if there was any issues though as the clutch ran perfectly fine before parking it up for 6 months.

  4. Rocket 3 2006 Clutch Problems.

    Sorry, I remeasured the free play and it's about 3.5mm.

  5. Rocket 3 2006 Clutch Problems.

    I'm also trying to fully understand how the clutch pin and shaft work (sorry I'm still sorta new to these). My understanding, after watching a video, is that the shaft as it rotates catches the button (pin). This pulls the button outward thus engaging the clutch. Please correct me if I'm wrong...

  6. Rocket 3 2006 Clutch Problems.

    Appreciate your Reply. I will most certainly give that a go. I probably should have tried it before I pulled the clutch cover. Though whilst I have it apart I want to make sure it's all alright before I put it back together.

  7. Rocket 3 2006 Clutch Problems.

    Hi Folks Approximately 6 months ago i parked up my 2006 Rocket 3 in the garage to do couple of things to it including painting the tank and fenders and also changing the handle bars. Long story short, after changing out the handles bars I realised I needed a different length clutch cable. So I...

  8. Rocket III aftermarket Speedometer.

    If anyone has installed either an aftermarket gauge or obd connected gauge on their Roadster please share your experience.

  9. Rocket III aftermarket Speedometer.

    Very good idea. May be easier to install aswell?

  10. Rocket III aftermarket Speedometer.

    Thanks for clearing that up for me. Very appreciated.

  11. Rocket III aftermarket Speedometer.

    Hello Guys I'm looking for some clarification regarding aftermarket Speedometers. I have a 2006 Roadster and was wanting to know if it's possible to switch out my clusters for a single cluster with Tach and speedometer in one.? My current research has given me conflicting information. Saying...

  12. Raked Rocket III

    Alright, this is probably a really long shot but... . Does anyone make raked neck bearing cups for a rocket III.? Reason I ask is because I'm wanting to rake my rocket about 3 degrees. I'm worried if I get raked trees they might make my trail far too low. But if I used raked bearing cups I...

  13. Why R3 front end won't work well on RIIIs

    Also if anyone else wants to chime in regarding this, please do. I am eager to find out if it has been done.

  14. Why R3 front end won't work well on RIIIs

    Claviger are you absolutely sure this is correct? I always thought the R3's had less rake than the RIII. I tried doing some research into this, as I was wanting to rake my RIII out a couple of degrees, and I was considering using the R3 trees. Though I'm not sure fork diameters are the same...
See more
Back
Top