Will any of these Handlebar Risers work on the Rocket III

[Six Guns]

Scootworks - Handlebar Risers for custom applications with 7/8" handlebars.

 

[snuffcityrider]

Not sure about those but Rivco makes one for the Rocket. I have one and it made a difference

 

[HellFire]

I love my Rivcos on my standard R3, some floor boards and everything should be right with the world.

However, now that I look at the link .... maybe an extra inch or two would be even sweeter. Guess you have a tough decision to make.

 

[xhdskip]

Scootworks - Handlebar Risers for custom applications with 7/8" handlebars.

I guess you've changed out your bars for 7/8"?
If so, don't know why they wouldn't work.

 

[HellFire]

Thats right ..... R3's are 1'' aren't they? Never dawned on me. Good catch.

 

[budman]

..get the thunderbike bars..they're 1&1/2"..and work with the stock risers or the rivcos..but ya gotta get a longer front brake line to use the rivcos, which is something I want to do this winter..

in this link they show 1&1/4", but they do have the 1&1/2"too..

Thunderbike Powersports - Triumph Rocket III Oversize T-Bars

 

[Six Guns]

Handlebar Risers

I guess you've changed out your bars for 7/8"?
If so, don't know why they wouldn't work.

No, I don't even have a Rocket III now, but I did test ride one and found the handlebars to be too far forward for my liking. One of the first changes that I would want to make are to add risers, but I didn't know the size of the Rocket III handlebars. I didn't know if the Scoot Works risers would work and was hoping that someone out there would know. Just waiting for the 2010 Roadster to arrive.

 

[xhdskip]

Thats right ..... R3's are 1'' aren't they? Never dawned on me. Good catch.

Thanks Hellfire,
I try.
Sixguns,
if they'll make a 1" riser it'd work, but you'd need longer cables for sure.
Anything further back than the Triumph or Rivco will need longer, as they're maxed out with them even after rerouting.