TuneECU and TPS position during a run

His wego is getting it and he is filling in all the fields now on a ride, data collecting
 
Thanks, will do that when ever get there.
 
Kevin frazier said:
At closed you show 1.6%, what is tps voltage set at .60? or i suspect higher, thanks
Click to expand...
R-III-R Turbo said:
This was the last ISCV reset done. FWIW the closed throttle often jumps around between 0 - 1%



Click to expand...


@Kevin frazier so just to further illustrate the 0% throttle thing, I ran an ISCV reset just now but didn't touch the TPS or idle stepper, or throttle. Just accepted the as found 0.60v and 0.72v.
And BOOM, 0% throttle closed but 94% WOT.







 
R-III-R Turbo said:
@Kevin frazier so just to further illustrate the 0% throttle thing, I ran an ISCV reset just now but didn't touch the TPS or idle stepper, or throttle. Just accepted the as found 0.60v and 0.72v.
And BOOM, 0% throttle closed but 94% WOT.







Click to expand...
Thanks that was blowing tuners mind wanting to know why it was doing that but after splaining what i read from you and decosse he moved on to wanting to know what the numbers were on the tables and i read him alain answer to you i had found when i found this old thread, learning digging, thanks man
 
4.8.52 (09 jun 2020)
Real time display of TPS and rpm position in the map screen
Click to expand...

Incredible response from Alain at TuneECU - he has re-incorporated the Throttle Position & Speed on MapEdit screen in the latest update of Android!
Very nice to have this feature again - amazing support!
 
Last edited:
Very helpful highlighted 98
 

Attachments

  • 0851BDFA-B7F8-4F08-9C02-702A92CEA2D9.png
    611.9 KB · Views: 36
Good result
Only works on F tables for me though? Not L tables ☹
 
I only use the windows version on Rockets, mainly because it is a pita to use puny tablets on the dyno. Having said that the L tables should not have TP surely as they are MAP based??
 
Neville Lush said:
mainly because it is a pita to use puny tablets on the dyno
Click to expand...
@Neville Lush , see my suggestions in this post - TuneECU on Android TV Box

Neville Lush said:
Having said that the L tables should not have TP surely as they are MAP based??
Click to expand...
Well yeah, wouldn't require TPS value of course
But how do you actually go about tuning the L-tables - I've never done that, but imagine you can't just set throttle to give you a specific MAP reading because that will change as the RPM changes
But if you think it would be an advantage @R-III-R Turbo to have maybe you could ask Alain if he could similarly adopt MAP and RPM on the L tables axes? I've done my bit, your turn
As you can see he's pretty accommodating so maybe he can add that too
 
DEcosse said:
@Neville Lush , see my suggestions in this post - TuneECU on Android TV Box
Click to expand...

Yes, or as the 2.3 rockets will never be up graded, I can just keep using the PC software . I do use the android version on other bikes, so when I get a chance I shall have a look at the suggestions more closely. It needs to be quick and easy for me, mainly because customers are constantly complaining of the cost.
 
You must log in or register to reply here.

Similar threads

Tuneecu
Replies
0
Views
762
jcomp
  • Question
Tuneecu
Replies
9
Views
1K
Kevin frazier
cord for tuneecu
Replies
4
Views
897
jcomp
TuneEcu
Replies
1
Views
722
R-III-R Turbo
Operation overhaul starts, first on the menu, TPS settings at closed throttle.
Replies
4
Views
576
Zanx
Menu
Log in
Register