MiamiDave

Supercharged
Joined
Sep 11, 2005
Messages
282
Location
West Texas
TB Diagnostics sensors page reads the TPS Volts at .590 at 0% throttle, and yet when I rev it the volts do not change, nor does the throttle show any percentage...it's been a while but this doesn't seem normal-yet the bike rides more or less fine.

The secondary TPS volts do move however, as well as the RPM's, injector pulse, etc.

What's the deal...?
 
It appears to now be moving, although slow. When th ignition is on, and engine of it reads throttle, but not with it on...?
 
Hit the reset ISCV at the bottom of the screen and follow the directions that scroll. Voltage will go real time time.
 
Back
Top