small light in headlight

[sixpack]

I installed the EB kit , but would like to replace the little orginal lights in the headlight,,, where do I get the power for these lights since I cut the wires??? thanks

 

[Gothlander]

From memory they are the yellow wires at the plug on the loom and are a separate circuit from the headlights.

 

[rolandrat]

yeah its the yellow wire,this one should have been left in place,and others removed.

 

[atomsplitter]

You can use the left over OEM plug and wire it back to the position lights. Just splice in a wire from the left to right bowls and plug it back into the harness. If memory serves the black wire is ground to those lights so you'll need to ground them as well. Easy.

 

[budman]

..other than being worthless, what good are they?..parking lights on a motorcycle?..

 

[tdragger]

..other than being worthless, what good are they?..parking lights on a motorcycle?..

It's one of those European weird requirements. Kind of like the sails the Brit guys have attached to the back.

 

[tdragger]

Britman has a good solution. Scroll to post #37.

http://www.r3owners.net/general-tech-talk/11383-here-comes-beaver-4.html

 

[HansO]

I installed the EB kit , but would like to replace the little orginal lights in the headlight,,, where do I get the power for these lights since I cut the wires??? thanks

The black and yellow wires are what you need to run the pilot/parking lights

 

[Battersea]

..other than being worthless, what good are they?..parking lights on a motorcycle?..

Legal requirement in the UK, no parking lights - no MOT certificate..