Sandybandy
.040 Over
It seems I have been lucky. I had my brake system bled in spring 2021 and had no issues since. I am due to put mid controls on my GT in the coming months, so I hope this issue does not show it ugly head again.
Peted05
Standard Bore
Sorry but they didn't show me the part/parts replaced, just pointed under the fuel tank and said "abs"
Mucker
.020 Over
- Joined
- Dec 27, 2022
- Messages
- 11
- Ride
- 2020 Rocket 3R 2016 Thruxton R
This rear brake issue is a disgrace. I have had mine bled by the dealer 5 X. Triumph recognise the issue and have replaced some of the componentry on some bikes to fix the issue. Not mine unfortunately. After the 4th bleed I was told by the dealer principal that if the brakes failed again then they would replace the modulator. They 'welched' on that promise the next time it occurred, stating that the latest bleeding technique resolved the issue. I havent had the issue since, but that last service was only 500kms ago and it seems that the issue recurs about every 2500kms on my machine. It is very frustrating and I am surprised that a reptitive failure of a key safety component hasnt attracted the attention of the authorities somewhere in the World. Perhaps they are waiting on a fatality!
rocketpup
.020 Over
- Joined
- Jun 29, 2022
- Messages
- 30
- Ride
- Rocket GT 2020
Seems none of the dealers know how to do the rear brake bleed. My GT needs to be bled every riding season.. When the bike sits during the off season
the pedal goes all the way to the bottom, but stays OK as long as i ride it often.
imcool
Turbocharged
- Joined
- Feb 22, 2022
- Messages
- 555
- Ride
- Rocket 3R 2022
some people saying on FB group that triumph has come up with new part number for rear brake hose and that seems to fix the issue. I asked those people who got the new hose but they either dont know the hose part number or never replied.
PJWDE1965
.020 Over
I just got mine back from Quaker City Motorsports in Philadelphia. Allegedly, the recall was preformed at the dealership in NY that I bought it from. However, the pedal went all the way down over the winter, so I told the shop at QSMS to just do the brake service/recall and I'd pay for it. The mechanic assured me that if the recall is done right, it solves the problem. They wound up not charging me, and so far so good.
imcool
Turbocharged
- Joined
- Feb 22, 2022
- Messages
- 555
- Ride
- Rocket 3R 2022
where is this shop again? is it triumph official dealer shop who fixed your issue?
Journeyman
"And this one is just right" ~ Goldilocks
I wonder how many are related to enabling hill assist. Just curious if those of you with a problem have that on.
Several reasons have been identified from what I can see. None seem to be definitive though.
1. Air in the system from not being bled properly to start with.
2. Wrong type of brake fluid.
3. Brake lines too close to the exhaust thereby heating up the brake fluid.
4. ABS module poor design.
5. Bad batch of ABS modules.
6. Incorrect bleeding procedure.
7. Use of hill start causing a blip between the front and rear brake systems.
Several reasons have been identified from what I can see. None seem to be definitive though.
1. Air in the system from not being bled properly to start with.
2. Wrong type of brake fluid.
3. Brake lines too close to the exhaust thereby heating up the brake fluid.
4. ABS module poor design.
5. Bad batch of ABS modules.
6. Incorrect bleeding procedure.
7. Use of hill start causing a blip between the front and rear brake systems.
PJWDE1965
.020 Over
Its in Philadelphia, Main St . It is a Triumph dealer and shop.
Vector
Supercharged
- Joined
- Jan 7, 2023
- Messages
- 452
I considered issues with that feature for some reason, I've turned it off. No need for it anyway.
Similar threads
