my bike lift.

[xhdskip]

For anyone that may be interested,
I got those jack pieces from the machinist today.
They have the holes for the rod attachment,
and will ship in the small priority box from the U.S.P.S.
for $4.95 anywhere in the U.S. without the rod.
To get a box the rod would fit in would more than double the shipping cost.
What I'm gonna do is use a short 16" piece of rope with knots on both ends
to keep em attached and from getting lost or separated.
Also, after you let her down off the jack you'll notice the rope dangling there,
so you won't ride off with em still attached and loose them.
So if anybody is interested and wants a set, I paid $25.00 a set
plus the $4.95 shipping in America, and thats what I'd want.
I'll need anyone interested to PM me with shipping details.
My e-mail is rocket3man@rocketmail.com for the paypal,
but I wouldn't want it till you have them and are satisfied with em.
I sincerely hope this helps some of you out.
Thanks guys,
skip

 

[bcbatman]

For anyone that may be interested,
I got those jack pieces from the machinist today.
They have the holes for the rod attachment,
and will ship in the small priority box from the U.S.P.S.
for $4.95 anywhere in the U.S. without the rod.
To get a box the rod would fit in would more than double the shipping cost.
What I'm gonna do is use a short 16" piece of rope with knots on both ends
to keep em attached and from getting lost or separated.
Also, after you let her down off the jack you'll notice the rope dangling there,
so you won't ride off with em still attached and loose them.
So if anybody is interested and wants a set, I paid $25.00 a set
plus the $4.95 shipping in America, and thats what I'd want.
I'll need anyone interested to PM me with shipping details.
My e-mail is rocket3man@rocketmail.com for the paypal,
but I wouldn't want it till you have them and are satisfied with em.
I sincerely hope this helps some of you out.
Thanks guys,
skip

Skip do you still have my contact Information?
bcbatman

 

[xhdskip]

Larry,
Can you PM me with it again please,
I deleted alot of stuff and ain't sure if I still got it.
I think you'll like em, they're pretty sweet.
Ride safe,
skip

 

[albertaduke]

bike lift

If anybody would want a similar setup,
the guy will make them for $25.00.
it allows you to pull all three plugs to change the oil without moving the jack around,
or removing the rear (or front) tire,
Not a bad deal actually.
I can get them made for anybody that needs one for the mentioned $25.00 plus shipping.
Not trying to make anything off these, just saw a need,
and have a way around these issues.

before I order one can you show a picture of this rig in action. cuz .. I am a bit in the fog,

 

[flhtpi]

before I order one can you show a picture of this rig in action. cuz .. I am a bit in the fog,

Same here, need a picture.

 

[xhdskip]

I'd love to guys,
but I gave our camera to our youngest daughter who just had a baby
and haven't bought another one yet.

 

[Markn2147d]

My lift

Here is my Leverage Locking Rocket Lift
No Jack needed
Very stable
Nothing in the way to work on the Bike
Small storage space needed
Can lift from either side (just turn it around)
No Handle to loose
Simple to use
Place Leverage Lift under bike angled tword rear tire Pin it through your frame
Place yellow bar through both slotted u channel
Hold Handlebars Step on yellow bar as high as you can
Once bike is up and not moving slide yellow bar halfway through u channel and your done.
Un Mount slide yellow bar and carefully push bike forward than pull pins Done

 

[bcbatman]

PM

Hi Skip
Sent you a P.M. Hope I didn't screw up. Please let me know if you don't get it. Will try again...
bcbatman

 

[xhdskip]

Got it Larry,
thanks,
skip

 

[albertaduke]

me too I sent a PM .......