Mushy Front Brake Syndrome - I may be on to something...
I hope you're right. You listed different diameters. Maybe if one of those bikes that the kit goes to matches the bikes using the same calipers as the Rocket it might be more likely to be the right size. Here's the chart of matching calipers...

If you get a rebuild kit and it fits I, for one, would sure like to know.

If you put in your bike on the Brembo website and go to calipers, there's a link to "compatible vehicles" and it lists Aprilia, Ducati, and Triumph. Should be a kit for one of these out there. Put in your year in case there is a difference (doubt it) for newer bikes. Here's what I see....

Front Brake/Clutch Master Cylinder Rebuild Kit?

Measure pucks and order seals, 30mm probably but seals for calipers as mentioned calipers are available.
www.r3owners.net



 
I’m not actually looking for a rebuild kit—I was just curious and trying to help the community identify possible replacement parts.


If you happen to open the MC again, it would be really helpful if you could take some measurements and share them. That way, we can at least try to match the correct size in case someone here ends up needing a rebuild kit.
 
You must log in or register to reply here.

Similar threads

Extend front brake line on GT
Replies
7
Views
573
A1A Rider
Mount passing light on front mudguard bracket
Replies
9
Views
453
dd14x
Front Brake/Clutch Master Cylinder Rebuild Kit?
2 3
Replies
22
Views
2K
Journeyman
Can the rear brake pedal be brought higher?
Replies
2
Views
430
atomsplitter
No rear brake again
4 5 6
Replies
57
Views
2K
Gregger
Menu
Log in
Register