Bought a cheap set of levers of the eBay and they are rubbish
supposed to be for a Rocket but fit so bad they don't even make the clutch safety switch half the time
and have loads of up and down movement
serves me right for being cheap stuff
Any recommendations of a brand that are tied and tested by your good self's
Mate - I use cheap Chines ones from eBay. And they are a perfect (better than stock) fit. Sometimes we win.........
ASV are hideously expensive - but WILL FIT. I would take a look at the V-Trec "VX" series.
I have mates here with them on other bikes and they are fine adjustable. If I changed - this is what I would buy.
Mate - I use cheap Chines ones from eBay. And they are a perfect (better than stock) fit. Sometimes we win.........
ASV are hideously expensive - but WILL FIT. I would take a look at the V-Trec "VX" series.
I have mates here with them on other bikes and they are fine adjustable. If I changed - this is what I would buy.
Cheers Barbaqris
Mate - I use cheap Chines ones from eBay. And they are a perfect (better than stock) fit. Sometimes we win.........
ASV are hideously expensive - but WILL FIT. I would take a look at the V-Trec "VX" series.
I have mates here with them on other bikes and they are fine adjustable. If I changed - this is what I would buy.
Over the years I have had several Chinese levers on my bikes. Usually, they don't work properly or as they should. My Blackbird wouldn't allow me to start the engine in any gear except neutral. My BMW would only work if the clutch lever was at a given position. I have learnt from bitter experience to keep the stock levers on