fuel pump

[TURBO200R4]

i need info
fuel pump pressure on early rocket
fuel pump part numbers
aftermarket ?
i remember reading threads but i could not find them
links?
thanks for helping

 

[ozrider]

Over the years I have used the Toyota RAV4 pump on a few rockets, same pressure size etc. just need to use the R3 filter screen

 

[Tripps]

Seeking a replacement fuel pump resource

I left my old one in stale gas back in the Bush administration, and it drowned, and I don't have the patience (or the 177 dollars) to get a new one from the nearest Triumph dealer. I'm thinking of replacing it with a Quantum, about seventy bucks delivered. Does anyone have sage advice to offer...

www.r3owners.net

 

[Gerald]

i need info
fuel pump pressure on early rocket
fuel pump part numbers
aftermarket ?
i remember reading threads but i could not find them
links?
thanks for helping

Walbro 342 pump and change fuse to 15 amps. From postings by warp9.9 and R-III-R Turbo.

 

[bebsy]

i need info
fuel pump pressure on early rocket
fuel pump part numbers
aftermarket ?
i remember reading threads but i could not find them
links?
thanks for helping

 

[ruzzle]

3 bar.
Dunno.
Aftermarket Walbro 342...almost straight swap.

 

[Gerald]

Walbro 342 pump and change fuse to 15 amps. From postings by warp9.9 and R-III-R Turbo.

Be careful what and where you purchase your pump, a lot of counterfeit stuff out there. If it sounds to good to be true, it probably is.

 

[Tripps]

Be careful what and where you purchase your pump, a lot of counterfeit stuff out there. If it sounds to good to be true, it probably is.

Yup, I learned that on my John Deere, the cheap aftermarket fuel pumps only last a year.

 

[TURBO200R4]

Be careful what and where you purchase your pump, a lot of counterfeit stuff out there. If it sounds to good to be true, it probably is.

thanks
when i searched i came up with this
when it said for walbro it was made in china and about half the cost
when it said walbro and had the made in USA imprinted in the housing that would b the good one.
also i have made a slight improvement may b posting a cure in a few days.

 

[bebsy]

thanks
when i searched i came up with this
when it said for walbro it was made in china and about half the cost
when it said walbro and had the made in USA imprinted in the housing that would b the good one.
also i have made a slight improvement may b posting a cure in a few days.

Sad thing is even original triumph parts are manufactured in China and relabled made in the UK the pump is no exception...we all know what the end game is there ask Elon