Front Brake's

[zenbiker]

Trumpy...There just has to be air in your line or a faulty master cylinder seal. I can't believe your dealer can't simply do a cylinder rebuild. this is soooo easy! Usually just means replacing the seal and/or re-honing the bore.

 

[Scotty]

I had the same problem, just bled the brakes and all was well.

 

[step1]

I had the same problem.Dealer took out the piston behind the brake pad cleaned it and reassembled it.Works ok so far.Problem i have is the front locks up to easy.Got no confidence now at all with the front end.

 

[Scotty]

Seems to me that a lot of you guys ride more than one bike, me i only got the one, so i know it inside out and don't have an issue with the brakes, they stop me well enough.
I drive different cars on a daily basis and they are all slightly different in feel in the brake department.
TRUMPY you can also get replacement levers for the bike that help, they give more adjustment. I think its a company called Pazzo or something like that, if you PM Sully he has some on his bike, he can tell you more.
http://www.gomoto.biz/cart/index.php?ma ... &cPath=128