Ever wish you stripped out your threads? Diff drain bolt POS

FUBAR bolt then?
I never torque the drain nor the fill bolts after snapping off the drain bolt once & having to dismantle the diff to get the magnet out! I drilled the heads to wire tie then together & just use a good fiber washer and snug up. Nver any thought to them vibrating out.
 
Geezus! Good luck!
 
Geezus! Good luck!
Already replaced the bolt from ace hardware for $0.85
I plan on drilling out a area and tapping in a press fit bucky ball (magnet)
But right now 4th gear granded and she is sleeping for the season till I can split the case and have the trans rebuilt from Robertsons and I'm doing a DIY stage 2 240hp build from carpenter and making my own headers. I want to do a true 3 pipe exhaust. Stay tuned at my garage channel I have stuff I'm going to be uploading and I'm doing a full out build on her.
 
The “true 3 pipe” exhaust will cost you torque & hp.. A good exhaust will enable the cylinders to help scavenge each other.
 
The “true 3 pipe” exhaust will cost you torque & hp.. A good exhaust will enable the cylinders to help scavenge each other.
Crossover is going under where the cat was.
It's been done. The look will be a 3 into . I can't stand a 3 into 1 look
 
Garage channel? Got a link?