Engine Management dashlight on NEW'08/'09 Tourer 499.9klms ?


You will need a bigger can than that for our Billy..... :lol: Your local stealer should be able to extract the dtc and identify the fault easy enough, good luck :wink:
 

Seem's you need to bugger around a little more if that takes the light out... :lol: Get the bike in for a check, some of the wiring loom plugs are prone to taking in water, more so if a pressure blaster is used to wash her down with, could be something to check , hey at least it's still going.. :wink: gremlins n all :lol:
 
check the tuneboy thread, if you get one it can tell you what error you had, i reckon there are probably cheeaper gizmo's that will do it too
 
Mine used to play up on the alarm every time I washed it , did all the connectors under the tank and never played up again 8) Quite a birds nest of wiring under the tank :shock:




Then I bought a quality jap bike :lol: :lol: :lol:
 
sully said:
Mine used to play up on the alarm every time I washed it , did all the connectors under the tank and never played up again 8) Quite a birds nest of wiring under the tank :shock:




Then I bought a quality jap bike :lol: :lol: :lol:
Click to expand...

:lol: :lol: :lol: :lol:
 
Muck around with anything electrical and the Engine Mgt System throws up an error. When the light goes on an error exists. If I get the light on I check the error with my Tuneboy it's always nothing so I reset the errors and the light goes out.

As I say it has only happend to me when I play around with the electrics, like disconnecting the battery, wiring up the aux. etc...
 
You must log in or register to reply here.

Similar threads

Storm Gt hill hold not available and engine light on.
2
Replies
11
Views
309
Kiwicol
Anybody recall the Germain engine guards name?
Replies
3
Views
246
Mongler07
09 running rough
Replies
8
Views
658
Mongler07
09 roadster starting
Replies
1
Views
649
awooten
Small Burn Marks on Side of Engine
Replies
6
Views
781
Dr.D
Menu
Log in
Register