Dumb mistake

warp9.9 said:
I believe since the changed the pressure plate the only fiber that needs to be monitored is the bottom one. It has a larger I.D. so it fits around the anti-judder spring and seat. If you switch to MTC fibers you remover the Anti-Judder spring and seat and all fibers have the same I.D.

why did you have the basket off Dave? Detewnt Spring? How did the back of the basket look? I am talking about the backlash eliminator springs and seats.
Click to expand...


Everything looked good on the basket. I thought the clutch may be slipping and making some noise . . didnt find anything except the auxiliary chain was WAY sloppy. I did the upgrades on the lifter and the lifter rod, replaced the chain, detent spring and decided to do the clutch plates and springs while I was in there. I got side tracked converting Nm to Ft lb and didnt do the clutch nut . .
 
boogerdave said:
Everything looked good on the basket. I thought the clutch may be slipping and making some noise . . didnt find anything except the auxiliary chain was WAY sloppy. I did the upgrades on the lifter and the lifter rod, replaced the chain, detent spring and decided to do the clutch plates and springs while I was in there. I got side tracked converting Nm to Ft lb and didnt do the clutch nut . .
Click to expand...
Ya the oil pump chain is sloppy on them. Sometimes I wonder if that adds to the rattle people are hearing. There is no adjustment on it I have 60,000 on mine and it hasn't changed and I open mine every year for something. Getting ready to pull her down again to add different head bolts so I can add more boost:D
 
Rocket Scientist said:
LISTEN TO YURSELF MON ! AV' YEE GONE MAD :eek:
Click to expand...
Na just thinking about bringing the boost in a little earlier before the rev limit. I can always vent it with the BLV I am adding If it seems to build to much at 9000 rpms. Adding the intercooler radiator combo back on her now that I have got the map tweaked in on the timing.
 
Back
Top