Dumb mistake

boogerdave

boogerdave

Nitrous
Joined
Oct 5, 2007
Messages
1,101
Location
Holt Florida
Sooo . . . I get done putting the bike back together, start cleaning up, pick up the old clutch basket nut and realize that I didnt ping the lip on the nut. Aint life grand? Lets do this all over again :cool:

By the way, does anyone know about the top and bottom disc on a barnett clutch? I couldnt find any difference in plates for the top one. Bottom yes, top no.
 
I believe since the changed the pressure plate the only fiber that needs to be monitored is the bottom one. It has a larger I.D. so it fits around the anti-judder spring and seat. If you switch to MTC fibers you remover the Anti-Judder spring and seat and all fibers have the same I.D.

why did you have the basket off Dave? Detewnt Spring? How did the back of the basket look? I am talking about the backlash eliminator springs and seats.
 
boogerdave said:
Sooo . . . I get done putting the bike back together, start cleaning up, pick up the old clutch basket nut and realize that I didnt ping the lip on the nut. Aint life grand? Lets do this all over again :cool:

By the way, does anyone know about the top and bottom disc on a barnett clutch? I couldnt find any difference in plates for the top one. Bottom yes, top no.
Click to expand...
call the first time in a practise run and you should feel a little better ;):)
 
xhdskip said:
That's just mean Hans.
Funny, but mean...;)
Click to expand...
There have been times over the years I have just about finished putting something back together and done a last minute check only to find something that should have been put in near the beginning... moments like that you say "Awe F##k IT" and start pulling it apart again:rolleyes:
 
Back
Top