'bout to pull the trigger

Dennsell said:
Silver motor is easy.. black output shaft casing, but on the black motor impossible I would say as all but the ign coils are internal mods..

JMO
Click to expand...


You're talking about the drive shaft? I have an 05 with a silver motor and the drive shaft is black
 
Comatose said:
How can I tell by a glance if the update kit has been installed?
Click to expand...
2008 does not need the update. By then the factory had fixed all the issues. The only thing the 2008 will need is the Eastern Beaver headlight solenoids. From the factory the power for both headlights is fed through the ignition switch, which leads to failure of the ignition switch. The kit from Eastern Beaver is about $75 and takes about an hour or less to install. That is all an 08 and up will need to be totally dependable.
 
Turbo

Yea I always thought they built a custom reversed exhaust manifold and hung it like a blower! That would be way too hot on your right leg. Under the bike now,,,that's interesting. I wonder how the heat will affect the starter long term?
 
The under the bike turbo kit is by Boost is good. the one mounted on the right side by the exhaust ports is the eco cycle kit
 
Dennsell said:
Its the Engine/gearbox casing .. housing the output shaft bearing, before the drive shaft assy.. mine was done in 2009
Click to expand...

Dennsel is the out put case black because you can not get it in silver anymore or did they just order the wrong kit?
 
You must log in or register to reply here.

Similar threads

Rivco risers and Standard handlebars for the Touring
Replies
0
Views
200
Junior
Rmoving injectors to clean
Replies
6
Views
401
Bob R
Struggling to figure out the cause of misfires
Replies
7
Views
826
concours
The big blunder
Replies
5
Views
810
kmrmike
How to lift?
2 3 4
Replies
31
Views
3K
Kevin frazier
Menu
Log in
Register