Filthy Phil
.040 Over
Where would I find stainless button head bolts to fit the front of the K-drive saddlebag bracket?
They are M10 X 75mm with 1.25mm thread.
They are M10 X 75mm with 1.25mm thread.
Bolts for K-drive brackets?
- Thread starter Filthy Phil
- Start date
-
- Tags
- brackets
TRIIICK
Living Legend
- Joined
- May 29, 2008
- Messages
- 3,447
- Location
- Plymouth Massachusetts
- Ride
- 05 Rocket III 01 Roadking 08 Busa
Try contacting New Bonneville... K-Drive Saddlebags
Since K-Drive is out of business, it's hard to believe New Bonneville sells them. Supposedly Cs4 was their successor but they don't make the brackets and the bags are not Iparex. The company that now sells what appear to be K-Drive gear is Longride.
TRIIICK
Living Legend
- Joined
- May 29, 2008
- Messages
- 3,447
- Location
- Plymouth Massachusetts
- Ride
- 05 Rocket III 01 Roadking 08 Busa
Give them a try,it says on their new page "if you don't see it on our site,let us know and we'll do our best to help you find it."
About Us
E Bay has these... The Genuine Kentucky Drive Motorcycle Bags
Also try Viking they have a universal release kit that might work..??
Triumph Bags. Best Motorcycle Saddlebags & Saddle Bag For Triumph
Good Luck
Last edited:
sleeves
Nitrous
For a bolt like that I'd go to Anzor Fasteners (they may not be in Aussie) but they are a fastener shop that specializes in SS, we get a lot of button-head caps off them for work and I carry M10 x 50 SS buttonhead caps in my ute as stock. EDL Fasteners I think would also be a go and I'm pretty sure they're in Aus, they should be cheap as chips. Hope this helps.
1olbull
Riding Motor Since 1950
Filthy Phil
.040 Over
Not as far as I know.
Filthy Phil
.040 Over
No luck with any of the places suggested.
This is the closest I've came but minimum order is 450. M10 - 1.25 x 75mm Button Socket Head Cap Screw, Stainless Steel A2 70. ISO 7380 7389510076 M10 1.25 75mm 5.5mm 17.5mm 6mm Full Thread - metric-threaded.com
This is the closest I've came but minimum order is 450. M10 - 1.25 x 75mm Button Socket Head Cap Screw, Stainless Steel A2 70. ISO 7380 7389510076 M10 1.25 75mm 5.5mm 17.5mm 6mm Full Thread - metric-threaded.com
Filthy Phil
.040 Over
Ok, I found some. They're not cheap with overseas postage but at least I have some now.
M10 x 1.25 x 80 Socket Button Screw DIN 7380F
M10 x 1.25 x 80 Socket Button Screw DIN 7380F
