Search results for query: *

  1. El Bruto

    couple of small questions after fitting PCV with autotune

    No, didn't come with a plug, I bought it privately off a guy on here..., So if I uncheck the o2 in tuneECU that will sort it? I don't need to buy one of the eliminator plugs and the PCV/autotune will still work fine?
  2. El Bruto

    couple of small questions after fitting PCV with autotune

    Ok.. so fitted a PCV and autotune today.., bike sounds great, much better than before although ive not ridden it yet.. BIG THANKS to Hans0 for all his help, advise and maps... 2 small issues... I fitted the new O2 sensor that came with the auto tune.. but now I have an ecu fault code, "P0031...
  3. El Bruto

    El Bruto

    ok.. so carbon fibre resin and different mattings now available.. just waiting for some aluminium sheet now.. Will keep ya'll posted
  4. El Bruto

    rocket classic.. can you drag the pegs?

    Well.. what a load of replies... As it happens we had a long day out with LOADS of twisties up and down the mountains.. Ive removed the chicken strips from the rear tyre, and still not ground the pegs, must be because they are not standard and considerably smaller than the original.. feeling...
  5. El Bruto

    Anyone fitted cruise control?

    looking for a nice looking cruise control.. don't really want one that rests on the brake lever.. Any recommendations?
  6. El Bruto

    rocket classic.. can you drag the pegs?

    changed the front springs for progressives, and the rear to Hagon Nitro's, but ride height is similar, the foot pegs have been changed to slightly smaller ones... could be the answer
  7. El Bruto

    rocket classic.. can you drag the pegs?

    just got back on my rocket after a long break.. I know I used to ride the ass off it, but after my accident I seem to have lost a little confidence in the beast... I know I have ground the pegs before, but does anyone do this regularly, will it handle that dort of lean angle comfortably?
  8. El Bruto

    Odd clutch behavior

    No, it the 06 one.. The one that left me stuck in 5th
  9. El Bruto

    Odd clutch behavior

    As you guys know I've just rebuilt the motor.. And it's now running good... But. If I wind the throttle open in higher gears I get a bit of clutch slippage.. Sorry I guess when I had to limp it home in 5th with wife on the back I've done the clutch.... But that's not the issue...
  10. El Bruto

    any advice on pulling the motor

    The crank sealant is 1207B
  11. El Bruto

    any advice on pulling the motor

    just had my motor in and out 3 times.. you will need the clutch removal tool (cheap one on eBay in stainless steel) and you will need the alternator puller tool.. that is a must. you should also order the special sealant )1202B i think) to put the crank case back together, order these now so...
  12. El Bruto

    El Bruto

    Ok.. So I'm happy with the sound.. its exactly as my bike should sound.. as for the end can.. more work to be done. I like the shape but could do with being a little longer and finished better.. So, who knows anything about carbon fiber? I'm thinking of making an outer shell for it to...
  13. El Bruto

    urgent help needed.. Oil issues

    running sweet now
  14. El Bruto

    El Bruto

    here ya go.. finished product... (nearly.. may mod the can slightly)
  15. El Bruto

    Another new rocketeer.

    Welcome from Spain. Enjoy the forum, very friendly bunch and hugely knowledgable
  16. El Bruto

    urgent help needed.. Oil issues

    Yeaaaaay sorted.. You guys are legends!!! Pulled the sump and the sieves were blocked which can only be from the old filter because I had cleaned them before.. And the engine was spotless... All running good now.. I'm gonna run it a bit.. With new filter on and do another oil...
  17. El Bruto

    urgent help needed.. Oil issues

    Ok guys.. thanks for the advise Yes the sieves were cleaned prior to 're assembling. I'll drain it down tomorrow and check gaskets. . And replace filter. Could I have put the one way pick up valve in the wrong way around?
  18. El Bruto

    urgent help needed.. Oil issues

    Just had a thought.. Stupidly I've used the old oil filter, it had o ly done 500m however that engine eat the cam.. So could oil filter blockage be the cause? Feeling stupid if it is!!
  19. El Bruto

    urgent help needed.. Oil issues

    Have just noticed.. Put in a total of 8 lars!!! Yet can only drain out about 5!! Wtf is going on???
  20. El Bruto

    Coolant temp??

    Thanks warp.. Think I've cured the coolant issue.. Airlocked. Now concerned about oil.. Please have a read of my oil issue thread and see if you can throw some light on it.
Back
Top