Search results for query: *

  1. mikevujcich

    2020 R3 GT Clutch Fluid change and Adjustment.

    Not on this bike. Brake fluid has been done by a shop tho.
  2. mikevujcich

    2020 R3 GT Clutch Fluid change and Adjustment.

    Next project, change clutch fluid and adjust. Any input or references please. Also gonna do coolant change. Tanks in advance Mike
  3. mikevujcich

    Swing arm bearing and Shock linkage Lube

    Yo Jman, Is there a section in the manual that deals with changing Clutch Fluid and Clutch Adjustment? My finger has been unable to locate it :(
  4. mikevujcich

    Swing arm bearing and Shock linkage Lube

    Hey Journeyman. I downloaded the manual from your link but the links in it don't work. Any input ?
  5. mikevujcich

    Swing arm bearing and Shock linkage Lube

  6. mikevujcich

    Swing arm bearing and Shock linkage Lube

    What does OP stand for. Anyway just looking at self serving swing arm and shock linkage lubrication. The R3 manual I have access to says you will need the tool mentioned above to reinstall the swing arm. You are correct, correct pn is T3880183 per manual. Mistake was caused by Triumph World...
  7. mikevujcich

    Swing arm bearing and Shock linkage Lube

  8. mikevujcich

    Swing arm bearing and Shock linkage Lube

  9. mikevujcich

    Swing arm bearing and Shock linkage Lube

  10. mikevujcich

    Swing arm bearing and Shock linkage Lube

    Yes, both sides and there was metal to metal at the front spline in places. Just take off the shield, 2 fixings, remove the engine cover below, 7 ? 8mm fixings, squeeze the plastic cover to remove it and bingo, lube away. For reassembly I found it's much easier to assemble the rear to the bevel...
  11. mikevujcich

    Swing arm bearing and Shock linkage Lube

    I was told by an official triumph mechanic to do the splines every 15,000 K or face failure of the shaft at about 80,000 K. Tripped me out this was not in the manual. I notice your studs came out with the castle nuts, I have 2 the same. Did you just reinstall as is, ( I did one the first time...
  12. mikevujcich

    Swing arm bearing and Shock linkage Lube

    True, not listed but need doing. Checked and did mine at about 28,000 K and was metal to metal in places. Just went in again at 52,000 K and grease had held up ok but doing it again. Easy enough job.
  13. mikevujcich

    Swing arm bearing and Shock linkage Lube

    Yes indeedy, somewhat sobering. Manual says pull apart, inspect all parts while at the same time saying the bearings can't be removed without fkg them up ? .... manuals ..... I can't see why you can't treat them like the bearing lube n the final drive, pull the seals and coat them with the aid...
  14. mikevujcich

    Swing arm bearing and Shock linkage Lube

    Need advice on removing swing arm from this point, disassembly, bearing lube, reassembly and shock pivots lube please
  15. mikevujcich

    2020 GT swing arm bearing, shock pivots lube

    Hi, doing a 30,000 m / 48,000 K service on my 2020 GT. Need advice on swing arm removal, reinstallation and shock pivots lube please. Also reference to a service manual if possible. Mike
Back
Top