Recent content by Habechian

  1. Where can I find all service bulletins for R3 ?

    Where can I find all Service Bulletins or Recall for R3 ?

  2. Reset ECU whitout Scanner or TuneBoy

    Hi Pig, I need reset the ECU, because the bike dont has idlle.

  3. Reset ECU whitout Scanner or TuneBoy

    I lost my TuneBoy cable and I need reset the ECU. How can I reset the ECU whitout any Scanner or the TuneBoy? Thanks a lot.

  4. How long time for complete Reset Adaptations?

    Should I "Reset adaptive settings"(in TE) whit the engine runing ?? The "Reset adaptive settings" in TE is the same "Reset adapt" in TB/Sensors?

  5. How long time for complete Reset Adaptations?

    How long time for complete Reset Adaptations? The message below Tune Edit says: Start Reset adaptations......and the light cable flash, and flash , and dont stop.

  6. ECUs Types

    What I see is that ONLY Touring model has a special map to Brazil and the R3/R3Classic dont have this "special" maps. Here, in Brazil, we have 25% alcool whit 75% gas.

  7. ECUs Types

    What is the diference between ECUs Classic and Touring ?? Why R3 Touring has a diferent map for Brazil and Classic dont? Can I use the Touring map in my Classic? Iam from Brazil.

  8. What is the cause for afterfiring

    What is the cause for afterfiring ???

  9. Tune me Baby!!

    Can I change the filds(A/F in TE)14,57 to another value? The bike is very lean in low rpm. Iam using 20219 map.

  10. What is "Reset ISCV" and " Adjust EXBV" ??

    What is "Reset ISCV" and " Adjust EXBV" in TuneBoy Dash/Sensor? How do I use? And When?

  11. Decel Datalog Results

    Stock filter and this exhaust: Shorty Exhaust for the New Triumph Rocket III

  12. Decel Datalog Results

    Still lean in low RPM and idlle.:confused:

  13. Decel Datalog Results

    A gas analyze machine. I dont know the name, whit one sensor inside end of exhaust.

  14. Decel Datalog Results

    I dont know what I doing wrong. I make decel mod(add %) in map 20219, full power, I2 I3 are same I4, plug the O2 sensor eliminator, uncheck the O2 sensor fited in TE, downlod the map to ECU, reset the adaptive settings and............the bike still very lean. Whit O2 checked or not , whit...

  15. Decel Datalog Results

    The SEC is 100%. The I2 I3 I4 are the same....its all right? i dont make any mod in I2 I3 or I4 tables...only 100 in SEC...all right??? Can I use the numbers whit add 10/15% for L1 in L2 and L3 or I need calculate diferents numbers for each L. Sorrry my english....:(
See more
Back
Top